Replaces

Wheel Bearing & Hub Assembly TRQ BHA54066 - 1ASHF00369

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part number: 4779199AA
  • Fits 5 Lug Wheel
  • Studs already installed
  • Direct replacement
  • Built to strict quality control standards
  • Fits RWD (Rear Wheel Drive) Models only
    • Does NOT fit AWD (All Wheel Drive) Models

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA54066 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (1:09)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:21)
    • Hold the wheel studs with a brake rotor
    • Remove the two 13mm bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (1:46)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Removing the Hub Assembly (2:12)
    • Tap between the hub and dust cover with a hammer and chisel
    • Remove the dust cover
    • Remove the 35mm center nut
    • Remove the wheel hub and bearing
  5. step : Installing the Hub Assembly (4:03)
    • Insert the wheel hub into the spindle
    • Install the 35mm nut
    • Torque the nut to 184 foot-pounds
    • Install the dust shield
  6. step : Preparing the New Brake Pads and Rotors (5:00)
    • Pry off the brake pad shims with a flat blade screwdriver
    • Clean the brake pad shims with a wire brush
    • Clean the caliper bracket with a wire brush
    • Apply brake grease to the shim-mounting area of the caliper bracket
    • Place the shim onto the caliper bracket
    • Apply grease to the caliper shims
    • Pull out the caliper slides
    • Apply grease to the caliper slides
    • Push the caliper slide into the caliper
  7. step : Installing the Brake Rotor (7:23)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two 18mm bolts into the caliper bracket
    • Tighten the two 18mm bolts to 70 foot-pounds of torque
  8. step : Installing the Brake Pads (8:49)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two 13mm bolts into the caliper
    • Tighten the two 13mm bolts to 44 foot-pounds of torque
  9. step : Reattaching the Wheel (9:53)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Rubber Mallet
  • Chisel
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Gloves
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 35mm Socket
  • Complete Metric Socket Set

3.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
1
Wheel bearing work great
Hey 1a is the best I shop with them all the time.
Wouldn’t order part from another online dealer if I had a chance, man I love fast delivery right to your door step .
January 3, 2018
Purchased
7 months ago
Great Service great parts. I'm telling everybody. Thank you 1A Auto.
June 16, 2017
Purchased
1 year ago
It lasted about 6 months, car is parked until i get to replace it again! Price and service was great, quality seems to be lacking
March 22, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2011 Chrysler 300 Rear Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2012-2016 Chrysler 300 SRT-8 Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2008-2011 Dodge Challenger Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2012-2014 Dodge Challenger SRT-8 Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2006-2011 Dodge Charger Rear Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2012-2014 Dodge Charger SRT-8 Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2005-2008 Dodge Magnum Rear Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ

This part replaces:

  • Hollander 538-01735
  • OE # 4779199AA
  • TRQ BHA54066
Part #: 1ASHF00369

TRQ
Brand #: BHA54066

How-to Video:

(10:22 min)