Replaces

Wheel Bearing & Hub Assembly TRQ BHA53993 - 1ASHF00163

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • 4 Bolt Flange
  • Fits 5 Lug Wheel
  • Replaces dealer part numbers: 1T0 498 621, 3C0 498 621, 8J0 598 625, 1T0498621, 3C0498621, 8J0598625
  • Wheel studs are not included
  • Direct replacement
  • Built to strict quality control standards
This wheel bearing & hub assembly is a great replacement and has good cost savings over a unit from the dealer.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53993 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:50)
    • Pry off the center cap with a flat blade screwdriver
    • Pry off the lug bolt covers with a pick
    • Loosen the 27mm hub bolt
    • Loosen the locking lug bolt with the key
    • Loosen the lug bolts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug bolts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:44)
    • Pry off the caliper bolt plugs by hand
    • Remove the two T47 Torx bolts from the brake caliper
    • Pry the caliper clip off with a flat blade screwdriver
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
  3. step : Removing the Brake Rotor (2:37)
    • Remove the two 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 bolt from the rotor
    • Apply rust penetrant to the hub
    • Thread in one lug bolt
    • Strike the back of the rotor with a hammer to loosen it
    • Pull the rotor off
  4. step : Removing the Hub (3:33)
    • Remove the 27mm hub nut
    • Thread in the hub bolt half way
    • Strike the hub bolt with a hammer to loosen the axle
    • Remove the hub bolt
    • Remove the three 16mm nuts from the control arm
    • Pry down the control arm with a pry bar
    • Tap the axle out of the hub with a hammer and a socket
    • Remove the four 12-point 12mm bolts from the hub
    • Thread one 12mm bolt half way into the hub
    • Tap the hub with a hammer to loosen it
  5. step : Installing the Hub (5:20)
    • Put the hub into place
    • Insert the 12mm bolts into the hub
    • Tighten the 12mm bolts to 50 foot-pounds of torque
    • Turn each hub bolt an extra 1/4- turn
    • Push the axle into place
    • Push the control arm onto its studs
    • Fasten the three 16mm nuts onto the control arm
    • Tighten the three 16mm nuts to 50 foot-pounds
    • Thread on the hub bolt by hand
  6. step : Installing the Brake Rotor (7:06)
    • Slide the rotor on
    • Insert the T30 bolt into the rotor
    • Put the bracket back into place
    • Start the two 21mm bolts by hand
    • Tighten the 21mm bolts to 90 foot-pounds
  7. step : Installing the Brake Pads (8:01)
    • Put the brake pads into the caliper bracket if they are not already installed
    • Put the caliper on
    • Insert the two T47 bolts into the caliper
    • Tighten the T47 bolts to 30 foot-pounds
    • Push on the wire caliper bracket clip
    • Push on the caliper bolt plugs
  8. step : Reattaching the Wheel (8:44)
    • Slide the wheel into place
    • Start the lug bolts by hand
    • Tighten the lug bolts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug bolts to 100 foot-pounds in a crossing or star pattern
    • Push on the lug bolt caps
    • Tighten the hub bolts to 150 foot-pounds
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Pick
  • Jack Stands
  • Hammer
  • Floor Jack

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 21mm Socket
  • 27mm socket
  • 16mm Socket
  • 12mm 12-Point Socket
  • 17mm Socket

4.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
Hub Assembly.
The part came on time and looked just like the part I took off. It was easy to mount on the car and I had no trouble woth it. The reason I took off a star is that I hear a whining sound coming from the hub assembly as I am driving. Im not sure if there is something wrong with it or if new hubs usually give off a whining sound.
August 26, 2017
Fits!
Fits exactly like the OEM original but is made in China. The packaging was a little pathetic, they shipped the bearing in its original packing inside another box with air cushions but the shipping was so rough or the bearing was so heavy it busted up the air packaging and left the bearing rattling around in the box. Not really an issue since its a giant chunk of metal... 5/5 starts because it fit perfectly and the installation video saved me a ton of time.
July 12, 2018
Part was perfect
The wheel hub and bearing fit perfectly. It was everything it was described to be. My only question and or regrets is The wheel hub and bearing fit perfectly. It was everything it was described to be. My only question and or regrets is some videos recommend the bolts be replaced. And there were no replacement bolts in the Box. Im sure that would have driven up the cost and I am okay with using the old bolts because they looked perfectly fine. One other issue and it doesnt relate to the park, is the video. Your video stated that it would be a 27 mm bolt on the axle hub, but mine was actually a 25 mm bolt. This caused me to have to run to the parts store a couple of times to get the right socket. Other than that I love the fact that a one puts out videos they have saved me thousands of dollars and they are my number one go-to anytime they provide the part that I need.
September 28, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this assembly come with drive axle/hub bolt, control arm pivot bolt and nut, and all other self-locking nuts for complete proper replacement?
Kevin P March 14, 2016
It only came with the hub. That is all I recived. I have put about 10k on this and have had no problems.
Marcus V March 14, 2016
Its been awhile since I installed this but, no, I dont believe it does. Its just the wheel bearing and hub assembly.
Whitney P March 14, 2016
Bearing and hub only
Brian F March 14, 2016
Year Make Model Description
2006-2013Audi A3 Audi A3 Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2006-2013Audi A3 Quattro Audi A3 Quattro Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2008-2014Audi TT Audi TT Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2008-2014Audi TT Quattro Audi TT Quattro Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2012-2017Volkswagen Beetle VW Beetle Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2009-2017Volkswagen CC VW CC Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2007-2015Volkswagen Eos VW Eos Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2006-2014Volkswagen GTI VW GTI Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2011Volkswagen Golf VW Golf (Built After 3/14/11 Production Date) Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2012-2014Volkswagen Golf VW Golf Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2005-2009Volkswagen Jetta VW Jetta (8th Vin Digit K) Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2010-2017Volkswagen Jetta VW Jetta Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2006-2010Volkswagen Passat VW Passat Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2012-2017Volkswagen Passat VW Passat Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2008Volkswagen R32 VW R32 Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2006-2009Volkswagen Rabbit VW Rabbit Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2009-2017Volkswagen Tiguan VW Tiguan Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
Part #: 1ASHF00163


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53993

How-to Video:

(10:06 min)