Replaces
Part Details
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs as well as replace the entire taillight assembly on this 2004 Volkswagen Jetta. We show you on the passenger side, but the driver side is the same procedure. The items you'll need include new taillights from 1AAuto.com, an 8mm socket and ratchet, and a flat blade screwdriver.
To access the nuts that hold the light into place, you want to first remove this panel back here. It just pulls right off. Now, you want to remove this 8mm nut, this 8mm nut, and this 8mm nut. We'll just fast-forward as Don removes the 3 of those. You can see he just loosens them with the socket and ratchet, and then removes them the rest of the way by hand. We do use a socket and ratchet, but just using a regular wrench works as well. We'll loosen them up with the wrench and then take them off by hand.
Once those are removed, the light will pull right out. Use a flat blade screwdriver to pry out the tabs on either side of the harness. Push the tabs on either side of this panel and pull it out. The bulbs, you just push them in, twist them counter-clockwise, and they pop out. Then push the new one in and twist it clockwise to lock it. All four are the same process.
On the left is the old taillight and on the right is the new one from 1A Auto. You can see they are identical, and they will mount exactly the same. Take this panel, push it into your new tail light assembly, and then reconnect the harness. Push the tail light back into place. We'll fast-forward as Don replaces those three 8mm nuts, and you can see he replaces them by hand and then tightens them up with the socket and ratchet. Now just replace that panel and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
