Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the blower motor resistor on this 2004 Volkswagen Jetta and it's the same part and similar process on these Jettas from 1999 to 2008 and the items you'll need for this are a new blower motor resistor from 1AAuto.com, a 6mm socket and ratchet and a flat blade screwdriver.
Underneath your glove box, you'll see this foam panel. Just pull it down and around that clip. Then, push the tabs on either side of this harness and just pull it free. Then remove this 6mm bolt right here and this 6mm bolt right here. We'll just fast forward as Don does that. Now the resistor will just pull down and out.
On the left is the old blower motor resistor. On the right is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Now just remove this clip with a flat blade screwdriver and transfer it over to your new blower motor resistor. Now push the resistor back up into place and replace those two 6mm bolts. Reconnect the harness and then just push this foam back up and over that clip. Then just pop it in and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
