Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Specifications

  • Sold as a Pair
  • Replaces dealer part numbers: 8693564-0 and 8693563-2
  • Includes lens and housing
  • Bulbs not included
  • Direct replacement for halogen style headlight
  • Without adjustable headlight beam
Fit guaranteed
  • This pair of headlamps will install just as your originals do. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight set should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing discolored, scratched, dull or damaged headlights with a new pair from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new pair of headlights can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new pair of headlights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Changing the High Beam and Low Beam Bulbs (0:46)
    • Twist the cap counterclockwise.
    • Twist the socket counterclockwise and pull it free from the assembly.
    • Pull the bulb up and out.
    • Connect the new bulb.
    • Twist the socket back into place.
    • Line up the cap and twist it clockwise.
  2. step : Removing the Headlight Assembly (1:50)
    • Remove the two 10mm bolts at the top of the headlight.
    • Pry off the bumper trim.
    • Remove the 12mm bolt behind the trim.
    • Remove the six plastic rivets from the top of the bumper cover.
    • Loosen the T25 screw from inside the wheel well.
    • Pull the front edge of the bumper cover out.
    • Remove the 10mm screw on the inside edge of the headlight.
    • Remove the three T25 screws on the outside of the headlight securing the adjusting plate.
    • Remove the 10mm behind the plate.
    • Pull the headlight out.
    • Disconnect the two connectors to free the headlight assembly.
    • The blinker bulb can be changed by twisting out the bulb.
  3. step : Replacing the Headlight Assembly (4:46)
    • Reconnect the two harnesses.
    • Remove the rubber gasket from the old headlight and place it on the new headlight.
    • Line up the headlight and push it into place and make sure the harnesses are not pinched.
    • Reinstall the 10mm under the adjusting panel.
    • Replace the three T25 screws.
    • Reinstall the 10mm bolt on the inside front edge of the headlight.
    • Reinstall the two 10mm bolts at the top of the headlight.
    • Reinstall the front bumper cover.
    • Tighten the T25 screw in the wheel well.
    • Reinstall the 12mm bolt in the bumper cover.
    • Put the trim piece into place.
    • Replace the six plastic rivets in the top of the bumper cover.
    • Use the two screw holes on the top of the headlight to aim the lights.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 12mm Socket

  • Torx Drivers & Sockets

  • T25 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2004Volvo V70 Volvo V70 Wagon Headlight Pair
2003-2004Volvo XC70 Volvo XC70 Headlight Pair
Only 1 left in stock
Part #: 1ALHP00604


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:05 min)