Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement engine mount is just what you need to keep your motor & transmission firm in place!

Specifications:

  • Lower Torque Strut
    • mounts to the crossmember at transmission
  • Direct replacement
  • No modifications needed
  • Replaces dealer part numbers: 30680750, 306807504, 30680750-4
  • Built to strict quality control standards

Replace your broken engine mount now with this great fitting aftermarket part. It makes a great replacement and has good cost savings over a dealer unit.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Engine Cover (0:41)
    • Remove the eight T30 Torx screws from the engine cover
    • Pull off the engine cover
  2. step : Removing the Engine Support Bracket (1:17)
    • Remove the four 14mm bolts from the engine support bracket
    • Cut off the zip tie that holds the power steering return hose to the upper strut mount
    • Attach an 18mm wrench to the engine mount nut
    • Remove the 15mm bolt from the top of the engine mount
    • Lift the engine bracket up and out
  3. step : Removing the Engine Mount (2:07)
    • Loosen, but do not remove, the four 14mm bolts from the engine mount
    • Lift the engine mount up and out with the bolts in it
  4. step : Installing the New Engine Mount (2:33)
    • Transfer the bolts from the old mount to the corresponding spot in the new mount
    • Put the new mount into place
    • Tighten the four 14mm bolts
  5. step : Reinstalling the Engine Bracket (3:10)
    • Put the engine bracket into place
    • Insert the four 14mm bolts into the engine bracket
    • Insert the 15mm bolt into the top of the engine mount
    • Tighten the 15mm bolt and fasten the 18mm nut onto it
    • Connect the power steering return hose to the engine bracket with a zip tie
  6. step : Reinstalling the Engine Cover (3:52)
    • Put the engine cover into place
    • Insert the eight T30 bolts into the engine cover

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
So far so good!!
Its obvious when I changed the old part and the newone in, I could tell the difference. Good material and quality. Definitely going back to 1A auto for my replacements parts. Thanks
April 25, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1993-1997Volvo 850 Volvo 850 Lower Torque Strut Engine Mount
1998-2004Volvo C70 Volvo C70 Lower Torque Strut Engine Mount
2001-2009Volvo S60 Volvo S60 Lower Torque Strut Engine Mount
1998-2000Volvo S70 Volvo S70 Lower Torque Strut Engine Mount
2004-2006Volvo S80 Volvo S80 Lower Torque Strut Engine Mount L5 2.5L
2001-2007Volvo V70 Volvo V70 Lower Torque Strut Engine Mount
2003-2007Volvo XC70 Volvo XC70 Lower Torque Strut Engine Mount
2003-2006Volvo XC90 Volvo XC90 Lower Torque Strut Engine Mount L5 2.5L
Part #: 1AEMT00140


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:40 min)