Replaces

Volvo Strut Assembly Front Driver or Passenger Side - 1ASTS00919

Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:30)
    • Loosen the lug nuts with your 19 mm socket and ratchet or a lug wrench.
    • Raise and secure the vehicle.
  2. step : Remove the brakes (2:13)
    • Check out our other videos for more detailed instructions on brakes
  3. step : remove the strut (1:47)
    • Hit the top three nuts and bottom two with penetrating oil
    • Remove the three 13 mm bolts.
    • disconnect the stabilizer link from the strut
    • Use a 17 mm socket to break the stabilizer link nut loose and then use an Allen wrench and a wrench to remove it the rest of the way.
    • Unclip the ABS cable from the strut.
    • Remove the 18 mm bolts at the bottom of the strut.
    • Pull the strut from the vehicle.
  4. step : Install the new strut (4:52)
    • Fit the strut into place and hand thread the three nuts up top.
    • Fit the strut into the steering knuckle and bolt in the 18 mm bolts.
    • Torque the 18 mm bolts to 55 to 60 ft lbs.
    • Tighten the top three nuts to 20 to 22 ft lbs.
  5. step : Reassemble the stabilizer links and brakes (6:10)
    • Tighten together the stabilizer link.
    • Clip the ABS cable back onto the strut.
    • Check out our other videos for more detailed brake assembly instructions.
  6. step : Put the wheel back on. (6:50)
    • Hand tighten the lug nuts
    • Lower the vehicle
    • See your owner’s for torque specs for the hub nut or bolt.
    • Torque the lug nuts in a star pattern to 100 ft lbs.
  7. If you took your brakes apart, pump the brakes a few times to recompress the calipers and carefully road test before driving regularly.

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 18mm Socket
  • 17mm Socket
  • 15mm Socket
  • 16mm Socket
  • 13mm Socket
  • 14mm Socket

  • Wrenches - Metric

  • 17mm Wrench
  • 19mm Wrench
  • 14mm Wrench
  • 13mm Wrench
  • 15mm Wrench
  • 16mm Wrench
  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1997 Volvo 850 Front Strut Assembly Driver or Passenger Side for Models without Self Leveling Suspension
  • 1998-2004 Volvo C70 Front Strut Assembly Driver or Passenger Side
  • 1998-2000 Volvo S70 Front Strut Assembly Driver or Passenger Side for Models without Self Leveling Suspension
  • 1998-1999 Volvo V70 Front Strut Assembly Driver or Passenger Side for Models without Self Leveling Suspension
  • 2000 Volvo V70 Front Strut Assembly Driver or Passenger Side (Built Before 3/00 Production Date) for Models without Self Leveling Suspension

This part replaces:

  • Monroe 71699
  • KYB 334678
Part #: 1ASTS00919



How-to Video:

(07:49 min)