The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

This Coil Over Plug Ignition Coil Set features the following specifications:

  • Comes as a SET:
    • Includes Six (6) Coils
  • Replaces dealer part number: 9125601, 30713416, 91256016, 91256010
  • Built to strict quality control standard
  • Direct replacement
  • 100% factory tested
  • Fits the following Volvo 6 Cylinder engines applications as listed:
    • L6 2.8L
    • L6 2.9L

These coils are for a distributorless application. Sold as a SET of SIX. Please see our other listing if a single coil is needed.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function properly for your specific application.

Optimum Performance

Optimal performance, TRQ ignition coils are designed to meet or exceed the requirements of the vehicle.  TRQ ignition coils provide the correct primary and secondary resistance, voltage output, and spark energy that the vehicle needs to restore to its original operating condition.

Premium Quality

Manufactured with quality components and materials by using advanced technology to meet the highest quality control standards in the industry.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Engine Cover (0:43)
    • Open the hood
    • Remove the two T25 Torx bolts from the intake hose brackets
    • Pull the intake hose aside
    • Remove the eight T30 Torx bolts from the engine cover
    • Twist off the oil cap
    • Pull off the engine cover
    • Twist on the oil cap
  2. step : Removing the Ignition Coils (2:53)
    • Disconnect the wiring harnesses from the ignition coils
    • Remove the 10mm bolt from each ignition coil
    • Pull out the ignition coils
  3. step : Replacing the Spark Plugs (3:33)
    • Remove the spark plugs with a spark plug socket and ratchet
    • Install the new plugs with a spark plug socket and ratchet
  4. step : Installing the New Ignition Coils (3:50)
    • Connect the wiring harnesses to the new ignition coils
    • Push the ignition coils onto their spark plugs
    • Insert the 10mm bolt into each ignition coil
    • Tighten the 10mm bolts to 7 to 8 foot-pounds of torque
  5. step : Reinstalling the Engine Cover (4:44)
    • Twist off the oil cap
    • Put the engine cover into place
    • Latch on the engine cover
    • Twist on the oil cap
    • Insert the eight T30 bolts into the engine cover
    • Move the intake hose into place
    • Insert the two T25 bolts into the intake hose brackets

Tools needed for replacement:

    Ratchets & Related

  • Torque Wrench
  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

  • Sockets - SAE

  • 5/8 Inch Spark Plug Socket

  • Torx Drivers & Sockets

  • T25 Torx Driver
  • T30 Torx Driver

4.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
1
0
0
0
On time
This item Was on time , affordable and good quality , i'm getting ready to do my next purchase I'm gonna recommend to anybody to do the same to save some money and time .
June 18, 2017
Purchased
1 year ago
The best
It a great replacement for your old bad ignition coils
April 12, 2017
Purchased
1 year ago
Good product
These coils are Chinese made and the OEM's are German made. That's where the savings are. But it's been 6 weeks since I installed these on my wife's XC90 and it's going strong. No complaints so far.
July 18, 2016
Purchased
1 year ago
Best price for good coils
I had two coils go out on my 2001 Volvo S80 T6. I looked around at prices and I could get all 6 coils at 1A Auto for the price of two at the dealer and local parts store! I didn't know what to expect since they may not be "OEM". I installed them and the car purrrrs.

I like the videos 1A Auto produces. They helped me with several projects on the car, including replacing coils and plugs.

Their customer service is first-rate.

Highly recommended.
March 27, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2006 Volvo S80 Ignition Coil 6 Piece Set L6 2.9L
  • 1999-2003 Volvo S80 Ignition Coil 6 Piece Set L6 2.8L
  • 2003-2005 Volvo XC90 Ignition Coil 6 Piece Set L6 2.9L
Part #: 1AERK00114

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(05:56 min)