1AEEK00468-Volvo Engine Mount
Replaces
Volvo Engine Mount - 1AEEK00468
1AEEK00468
These replacement mounts are just what you need to keep your motor firm in place!
Specifications:
- Comes as a SET of 4
- (1) - Engine Mount - UPPER
- Replaces dealer part numbers: 30680770-2, 30680770, 306807702
- (2) - Engine Mounts - LH (Driver Side) & RH (Passenger Side)
- Replaces dealer part numbers: 30778951-1, 307789511
- (1) - Engine Mount - RH (Passenger Side)
- Replaces dealer part numbers: 30748811-4, 307488114
- (1) - Engine Mount - UPPER
- Direct replacements
- Built to strict quality control standards
Replace your broken engine mounts now with these great fitting parts. They make great replacements and have good cost savings over dealer parts.
Lifetime Warranty
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
-
step : Removing the Engine Cover (0:41)
- Remove the eight T30 Torx screws from the engine cover
- Pull off the engine cover
-
step : Removing the Engine Support Bracket (1:17)
- Remove the four 14mm bolts from the engine support bracket
- Cut off the zip tie that holds the power steering return hose to the upper strut mount
- Attach an 18mm wrench to the engine mount nut
- Remove the 15mm bolt from the top of the engine mount
- Lift the engine bracket up and out
-
step : Removing the Engine Mount (2:07)
- Loosen, but do not remove, the four 14mm bolts from the engine mount
- Lift the engine mount up and out with the bolts in it
-
step : Installing the New Engine Mount (2:33)
- Transfer the bolts from the old mount to the corresponding spot in the new mount
- Put the new mount into place
- Tighten the four 14mm bolts
-
step : Reinstalling the Engine Bracket (3:10)
- Put the engine bracket into place
- Insert the four 14mm bolts into the engine bracket
- Insert the 15mm bolt into the top of the engine mount
- Tighten the 15mm bolt and fasten the 18mm nut onto it
- Connect the power steering return hose to the engine bracket with a zip tie
-
step : Reinstalling the Engine Cover (3:52)
- Put the engine cover into place
- Insert the eight T30 bolts into the engine cover
Tools needed for replacement:
- Wire Ties
- Wire Cutters
- Ratchet
- Socket Extensions
- 14mm Socket
- 15mm Socket
- T30 Torx Driver
Materials, Fluids, and Supplies
Pliers, Cutters & misc Wrenches
Ratchets & Related
Sockets - Metric
Torx Drivers & Sockets
Start typing your question and we'll check if it was already asked and answered. Learn More
Vehicle Fit
- 2001-2004 Volvo S60 Engine Mount L5 2.3L 4 Piece Set
- 2001-2002 Volvo V70 X/C Engine Mount 4 Piece Set
- 2003-2007 Volvo XC70 Engine Mount 4 Piece Set
- 2003-2006 Volvo XC90 Engine Mount L5 2.5L 4 Piece Set
