These axle shafts are just what you need to get your vehicle in good working order!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) Front
  • CV Style Axle Shaft
  • Brand New
    • Not remanufactured
    • No core charge
  • Built to strict quality control standards
  • Correct for models with or without ABS (Anti-Lock Brakes)

These CV axle shaft assemblies make great replacements and have good cost savings over the dealer parts!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:30)
    • Loosen the lug nuts with your 19 mm socket and ratchet or a lug wrench.
    • Raise and secure the vehicle.
  2. step : Remove the brakes (2:13)
    • Check out our other videos for more detailed instructions on brakes
  3. step : remove or move the strut out of the way (3:20)
    • Hit the top three nuts and bottom two with penetrating oil
    • Loosen two or remove two of the 13 mm bolts.
    • disconnect the stabilizer link from the strut
    • Use a 17 mm socket to break the stabilizer link nut loose and then use an Allen wrench and a wrench to remove it the rest of the way.
    • Unclip the ABS cable from the strut.
    • Remove the 18 mm bolts at the bottom of the strut.
    • Move the strut to the side.
  4. step : Remove the CV Joint Axle (6:17)
    • Use a hammer and a socket extension to drive out the axle.
    • Unbolt the axle from the transmission using a 12 mm socket and ratchet
    • Pull your axle out of the car.
    • Replace with your new axle.
    • Bolt the new axle into the transmission and torque the cap bolts to 35 ft lbs.
    • Work the axle into the hub.
    • Fit the strut into the steering knuckle and bolt in the 18 mm bolts.
    • Torque the 18 mm bolts to 55 to 60 ft lbs.
    • Tighten the top three nuts to 20 to 22 ft lbs.
  5. step : Reassemble the stabilizer links and brakes (10:25)
    • Tighten together the stabilizer link.
    • Clip the ABS cable back onto the strut.
    • Check out our other videos for more detailed brake assembly instructions.
  6. step : Put the wheel back on. (11:30)
    • Hand tighten the lug nuts
    • Lower the vehicle
    • See your owner’s for torque specs for the hub nut or bolt.
    • Torque the lug nuts in a star pattern to 100 ft lbs.
  7. If you took your brakes apart, pump the brakes a few times to recompress the calipers and carefully road test before driving regularly.

Tools needed for replacement:

    Allen Wrenches

  • 7mm Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Hammer

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 11mm Socket
  • 14mm Socket
  • 19mm Socket
  • 17mm Socket
  • 16mm Socket
  • 18mm Socket
  • 15mm Socket
  • 10mm Socket
  • 12mm Socket
  • 13mm Socket

  • Wrenches - Metric

  • 11mm Wrench
  • 15mm Wrench
  • 18mm Wrench
  • 12mm Wrench
  • 17mm Wrench
  • 14mm Wrench
  • 13mm Wrench
  • 16mm Wrench
  • 10mm Wrench
  • 19mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Volvo cv shafts and hubs
Great stuff, Easy button mode. The shafts and hubs looked and function as good if not better than oem
March 2, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(13:17 min)

Tools List:

    Allen Wrenches

  • 7mm Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Hammer

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 11mm Socket
  • 14mm Socket
  • 19mm Socket
  • 17mm Socket
  • 16mm Socket
  • 18mm Socket
  • 15mm Socket
  • 10mm Socket
  • 12mm Socket
  • 13mm Socket

  • Wrenches - Metric

  • 11mm Wrench
  • 15mm Wrench
  • 18mm Wrench
  • 12mm Wrench
  • 17mm Wrench
  • 14mm Wrench
  • 13mm Wrench
  • 16mm Wrench
  • 10mm Wrench
  • 19mm Wrench




Vehicle Fit

  • 1993-1997 Volvo 850 Pair CV Axle Shaft Front
  • 1998 Volvo C70 Pair CV Axle Shaft Front
  • 1999 Volvo C70 Pair L5 2.4L CV Axle Shaft Front
  • 1998 Volvo S70 Pair CV Axle Shaft Front
  • 1998 Volvo V70 Pair CV Axle Shaft Front Wheel Drive excluding R Models Front
Part #: 1AACS00072

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More