Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • LH Driver Side
  • Replaces dealer part number: 8628402-3
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Remove the Parking Light (1:00)
    • Press down the tab and pry out the assembly.
    • Unplug the wiring harness.
  2. step : Remove the headlight assembly (1:25)
    • Disconnect the wiring harness
    • Remove the three 10 mm bolts with socket and ratchet.
    • Remove the bulb covers and remove the wire retainers to replace the bulbs
    • Remove the wiper stops with your T25 Torx driver.
  3. step : Install the headlight assembly (4:15)
    • Install the wiper stop.
    • Plug in the wiring harness.
    • Bolt the headlight assembly into place using your 10 mm socket and ratchet.
  4. step : Install the parking light assembly (6:05)
    • Plug in the wiring harness.
    • Clip the parking light assembly into place.
  5. step : Aim your headlights. (6:35)
    • Use a Phillips screwdriver to aim the headlights.
    • The concentration of the low beam should be an inch below the height of the bulb at 20ft away.
    • The concentration of the high beam should be level with the height of the bulb at 20ft away.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T25 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2002Volvo C70 Volvo C70 Headlight Driver Side
1998-2000Volvo S70 Volvo S70 Headlight Driver Side
1998-2000Volvo V70 Volvo V70 Headlight Driver Side
Part #: 1ALHL00616


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:24 min)