This FRONT Disc brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • Fits FRONT Rotors
  • 4 Piece brake pad set
  • Direct replacement
  • Professional Grade Ceramic Enhanced Disc Brake Pads

This FRONT brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:03)
    • Loosen the lug nuts with a 19 mm socket and breaker bar.
    • Raise and secure the vehicle.
    • Remove the lug nuts and stet the wheel aside.
  2. step : Remove the calipers (1:43)
    • Check the condition of the brakes; observe how much brake pad is left and if there are any deep grooves in the rotor.
    • Remove the caliper bolt caps.
    • Use a T47 Torx bit and ratchet to loosen up the caliper bolts.
    • With a flat blade screwdriver, pry the caliper pistons back to remove the caliper.
    • Use a wire tie to secure the caliper up out of the way.
    • Discard the old pads.
  3. step : Remove and replace the rotor (4:14)
    • Use a 15 mm socket and breaker bar to remove the bolts securing the caliper bracket.
    • Remove the rotor.
    • Clean the new rotor with brake cleaner product.
    • Mount it onto the hub and thread a lug nut onto it to hold it steady while you put the caliper bracket on.
    • Use a 15 mm socket and ratchet to mount and secure the caliper bracket.
    • Torque the 15 mm bolts to 80 ft lbs.
  4. step : install the caliper and brake pads (7:20)
    • Use a large C-Clamp to compress the pistons in the caliper
    • Apply a little anti-seize grease to the edges of the brake pads and insert them into the caliper brackets.
    • Put the caliper into place and torque the T47 Torx bolts to 25-30 ft lbs.
  5. step : replace the wheel (9:08)
    • Put the wheel on and hand thread the lug nuts.
    • Lower the vehicle
    • Using a star pattern, torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large Hammer
  • Large C-Clamp
  • Jack Stands

  • Ratchets & Related

  • Socket Extensions
  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Torx Drivers & Sockets

  • T47 Torx Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1997 Volvo 850 Front Premium Posi Ceramic Brake Pads Nakamoto
  • 1998-2005 Volvo C70 Front Premium Posi Ceramic Brake Pads Nakamoto
  • 1998-2000 Volvo S70 Front Premium Posi Ceramic Brake Pads Nakamoto
  • 1998-2000 Volvo V70 Front Premium Posi Ceramic Brake Pads Nakamoto

This part replaces:

  • Nakamoto CD618
Part #: 1ABPS00235

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD618

How-to Video:

(10:15 min)