In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Pre-assembled, loaded strut & spring assemblies allow for a quicker, safer install than replacing with just bare struts. 

Trouble-Free Install

Trouble-free install includes the matched parts needed to get the job done. New mounts, bearings, springs and hardware will provide a better ride for your vehicle and save you time from not having to do the job again because a used part failed afterwards.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

3.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
strut and spring
They are too high on the front.
They are extremely stiff and they feel like poor quality
The top strut is supposed to the correct arrow directions like the stock ones but they don't so is confusing for installation.

I would not get these lacree quick struts again.
February 19, 2017
1 year ago
Response from 1A Auto
We are sorry to hear of your experience with these struts. At your convenience, please call us at 1-888-844-3393 so we may set up a return for refund, or a warranty replacement if you prefer.
February 20, 2017
Alex PStaff
Smooth sailing
I'm just about to hit a hundred K and it was just time had this job done last week and the car drives a lot smoother and no more boom boom shaking going down the highway. Giddy up y'all!
November 27, 2017
5 months ago
All complete and easily installed. Yes, like most reviews, they are high in the front, but settle over time.
February 24, 2018
10 months ago
Too high
I bought these struts but they are too high and they vibrate.
November 9, 2017
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
Is it an exact replacement to the OEM suspension or something different? Also I have very expensive tsw low profile rims on my car, wouldn't putting stiffer suspension may crack my rims because of more stress on it??
Harshal S on Jun 4, 2017
BEST ANSWER: Used these in my 2008 Jetta 2.5, they were not OEM and were so stiff that my front end is almost 2 inches higher than the back. Had a shop put them in and saved me $400 and wasn't going to spend the money to remove return and replace again. If your looking for an exact fit I am not sure this will work for you. Good luck.

Vehicle Fit

  • 2012-2013 VW Beetle Front Strut & Spring Assembly Pair
  • 2007-2011 VW Eos with Sport Suspension Front Strut & Spring Assembly Pair
  • 2006-2013 VW GTI Front Strut & Spring Assembly Pair
  • 2010-2013 VW Golf Front Strut & Spring Assembly Pair
  • 2005 VW Jetta Front Strut & Spring Assembly Pair L5 2.5L
  • 2006-2010 VW Jetta Front Strut & Spring Assembly Pair
  • 2006-2010 VW Passat Front Strut & Spring Assembly Pair
  • 2006-2009 VW Rabbit Front Strut & Spring Assembly Pair

This part replaces:

  • Reference Number 9214-0127
  • Monroe 172311
Part #: 1ASSP00940