Replaces

Volkswagen Strut & Spring Assembly Front Pair - 1ASSP00009

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Pre-assembled, loaded strut & spring assemblies allow for a quicker, safer install than replacing with just bare struts. 

Trouble-Free Install

Trouble-free install includes the matched parts needed to get the job done. New mounts, bearings, springs and hardware will provide a better ride for your vehicle and save you time from not having to do the job again because a used part failed afterwards.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the top of the strut (1:05)
    • Pop the hood and secure it.
    • Apply penetrating oil to the 21 mm nut at the top of the strut.
    • Use a 7 mm Allen wrench to secure the bolt and use your 21 socket and ratchet to remove the nut.
  2. step : Remove the wheel (3:12)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  3. step : Remove the bottom of the strut (4:15)
    • Use a breaker bar and penetrating oil to unbolt the 18 mm strut bolts on the bottom
    • Remove the ABS bracket with your 10 mm socket and ratchet
    • Pull the strut down and out.
  4. step : Install the new strut (7:03)
    • Bolt the strut back in, torquing your 14 mm bolts to 35-45 ft lbs
    • Insert your spindle to the lower end of the strut and raise your control arm until the bolt holes line up.
    • Torque the bottom 18 mm nut to 85 ft lbs
    • Replace your ABS bracket with your 10 mm socket and ratchet.
  5. step : Replace the wheel (11:15)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs using a star pattern.

Tools needed for replacement:

    Allen Wrenches

  • 7mm Allen Wrench

  • General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Pipe Wrench
  • Lug Wrench

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 20mm Socket
  • 19mm Socket
  • 18mm Socket
  • 21mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 18mm Wrench
  • 12mm Wrench
  • 14mm Wrench
  • 16mm Wrench
  • 17mm Wrench
  • 11mm Wrench
  • 15mm Wrench
  • 10mm Wrench
  • 13mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
struts were perfect very easy to install price was great great value i loved them thanks
February 11, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 11 answers
Does this product include the strut mount?
Miles on Mar 20, 2016
BEST ANSWER: Yes. It is a total replacement. The most difficult part was getting the old ones off.
Does this include new top strut nut?
Antwan P on Apr 19, 2017
BEST ANSWER: this kit includes everything you need incl nuts and strut bearings i recomend highly great purchase

Vehicle Fit

  • 1995-2002 VW Cabrio Strut & Spring Assembly Front Pair
  • 1992-1994 VW Corrado Strut & Spring Assembly Front Pair V6 2.8L
  • 1996-1998 VW Golf Front Strut & Spring Assembly L4 2.0L Models Pair without ABS Brakes
  • 1996-1998 VW Jetta Sedan Front Strut & Spring Assembly L4 2.0L Models Pair

This part replaces:

  • Monroe 171933
Part #: 1ASSP00009



How-to Video:

(11:49 min)