Replaces

Volkswagen Radiator & A/C Condenser Cooling Fan Assembly - 1ARFA00461

Specifications:

  • Temic Style, Single Shroud, Dual Fan
  • New, not rebuilt, electric motors
  • Geometrically designed plastic blade for optimal circulation and uniform balance
  • 100% Performance factory tested
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug(s) for trouble free installation

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Splash Shield (0:35)
    • Remove the T25 Torx screws from the splash shield
    • Release the splash shield tabs
    • Pull the splash shield down and off
  2. step : Removing the Radiator Fan (1:03)
    • Unclip the radiator hose from the radiator fan
    • Unclip the wiring harness from the fan
    • Disconnect the radiator fan wiring harness
    • Remove the two T30 screws from the top of the fan
    • Remove the two T30 screws from the bottom of the fan
    • Pull the fan down and out
  3. step : Preparing the Radiator Fan (2:29)
    • Unclip the wiring harness brackets from the old fan
    • Clip the brackets onto the new fan
  4. step : Installing the Fan (3:22)
    • Lift the fan into place
    • Insert the two T30 screws into the bottom of the fan
    • Connect the fan wiring harness
    • Clip the harness into place
    • Clip the radiator hose onto the fan
    • Insert the two T30 screws into the top of the fan
  5. step : Installing the Splash Shield (4:52)
    • Clip on the splash shield
    • Insert the T25 screws into the splash shield

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Torx Drivers & Sockets

  • T30 Torx Bit
  • T25 Torx Driver

5.0 / 5.0
19 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
19
0
0
0
0
The product fit perfect in my 06 Jetta. The AC works like it is supposed to with both fans working. So easy to install. Couldn’t be happier. Thank you A1Auto!
August 8, 2018
Purchased
1 month ago
Great product/excellent price
I ordered the radiator fan for my 2006 VW Jetta. The part arrived on time, packaged to protect part from damage. The online tools helped me select the correct part for my vehicle. I was a little apprehensive to order parts online, but the part came, was a perfect fit, and the provided video was a huge help for a successful completed job! I will definitely use A1 Auto for all future purchases!
August 1, 2018
Purchased
1 month ago
Easy diy
I watched the video and it went exactly as shown. The vw jack was enough to raise car onto jack stands with plenty of clearance to remove and install. Fans are functioning and all is well.
July 28, 2018
Purchased
1 month ago
Works great
Bought this after the fan assembly on my wife's car failed and it works great, haven't had any issues with it. Also, don't undervalue the free tutorial videos that made the replacement super simple.
July 9, 2018
Purchased
2 months ago
Works Well!
The item came on time, it was affordable and I had a mechanic install it. Now the AC and fans on my car are both working much better!
July 6, 2018
Purchased
2 months ago
Easy ordering, great delivery.
I found a new place to order my parts. Easy ordering, delivered quickly and exactly as promised. Fit perfectly. Will be ordering again soon.
July 5, 2018
Purchased
2 months ago
Highly recommend
Easy site, product arrived quickly no issues. Product worked great. Price was way cheaper than many stores. Would definitely recommend!
July 5, 2018
Purchased
2 months ago
Not bad guys
Part arrived on time and works. I have an 09 jetta 2.5 SEL sedan and this was the exact fan I needed. I used the 'how to' video which was exactly how it was done. Very helpful. I'll be using this site in the future.
June 30, 2018
Purchased
1 month ago
Exact fit, perfect function
This part was an exact fit for my 2008 Jetta, and it cost me HUNDREDS less than a genuine VW part. One thing to note, I actually had the part installed by my local auto shop (1.25 hours labor charge); the fan assembly is very tall and because it slides in through bottom of the engine bay, clearance is an issue and I couldn't safely jack my vehicle up high enough.
June 21, 2018
Purchased
2 months ago
Excellent value
I needed to replace my condenser fan that quit working, this is just what I needed. Replacement was easy and took about 30 minutes. I could have just replaced the faulty fan motor, but for not much more
I replaced everything with a new assembly. Fit was perfect, no issues to install.
June 3, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 17 answers
This comes with the fan motors as well?
Jesus on Aug 13, 2015
BEST ANSWER: Yes. It did for me. Everything in the entire shroud including both fans with motors and the regulating sensor. It did not have the for "torx screws" that attach it to the car but you can reuse the ones on there. Very easy install. I referenced both 1aauto and YouTube.
Any idea who is the manufacturer of this part and how its quality/durability compares to the OE assembly?
Matthew C on Jun 20, 2018
BEST ANSWER: Most likely made in China. Fan has been on the VW for nearly 2 years no issues. Quality as good as OEM.
Does this part work for a manual transmission 2006 Jetta?
Chris S on Sep 3, 2017
BEST ANSWER: This will fit your vehicle as long as it fits the criteria below:

2006 VW Jetta Radiator Cooling Fan Assembly L5 2.5L For Models With 150 Watt Cooling Fans
How do you know if you need the 150 watt assembly or the 200 watt assembly?
Randall B on Apr 27, 2017
BEST ANSWER: Check the details on the description of the fan models. I have a 2.5 liter. It looks that yours is a 200. Compare the connection. Also check online for the part number. I checked the fit with the autopart store they may be able to give you a definite answer. When I changed mine it didn't give me that choice. Good luck
will this fit 07 jetta gli assembly # 1k0121205g?
wilzz on May 4, 2018
BEST ANSWER: This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.
Will this fit a Jetta 2008 2.5L automatic as well?
Susana C on Apr 16, 2016
BEST ANSWER: No

Vehicle Fit

Year Make Model Description
2012-2015Volkswagen Beetle VW Beetle L5 2.5L 150 Watt Cooling Fans Radiator & A/C Condenser Cooling Fan Assembly
2010-2014Volkswagen Golf VW Golf L5 2.5L 150 Watt Cooling Fans Radiator & A/C Condenser Cooling Fan Assembly
2005-2017Volkswagen Jetta VW Jetta L5 2.5L 150 Watt Cooling Fans Radiator & A/C Condenser Cooling Fan Assembly
2006-2009Volkswagen Rabbit VW Rabbit L5 2.5L 150 Watt Cooling Fans Radiator & A/C Condenser Cooling Fan Assembly

This part replaces:

  • OE # 1K0959455DT
  • OE # 1K0959455DH
  • OE # 1K0959455P
  • Partslink VW3120100
  • Hollander 674-50213B
  • TYC 621490
  • DEPO 341-55005-100
Part #: 1ARFA00461


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:27 min)