Specifications:
  • Brand New Lighting Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Replacing Drivers Side Headlight Bulbs (1:07)
    • Remove the dust cover
    • Squeeze retainer clip
    • Pull the light out carefully.
    • Bulb pulls free from socket
    • Replace bulb
    • Put the light back into place by squeezing the retainer clip
    • But the dust cover back on
  2. step : Replacing Passenger Side Headlight Bulbs (2:56)
    • Remove the air intake panel
    • Using a Phillips screwdriver remove the screws on the air intake duct behind light
    • Remove the dust cover
    • Squeeze retainer clip
    • Pull the light out carefully.
    • Bulb pulls free from socket
    • Replace bulb
    • Put the light back into place by squeezing the retainer clip
    • But the dust cover back on
    • Line up and replace the air intake duct and screws
  3. step : Removing a Headlight Assembly (4:15)
    • Pull the white ring behind the headlight
    • Reach in behind the light and pull the side light free
    • Remove the two caps above the light to access the screws
    • Remove the two T20 screws on the top and the one on the side of the headlight
    • Pull the light free. First away from the grill and then out
    • Disconnect the wires
  4. step : Reinstalling a Headlight Assembly (5:52)
    • Plug the wiring harness in to the light
    • Line up the tabs on the light and push it into place. Sliding the light to the side to secure it
    • Replace the T20 screws by hand, and tighten firmly
    • Twist the bulb for the side light back into the assembly
    • Line up the tabs and push the light in to place
    • Pull back the white ring and latch it to secure the light
    • Replace the screw caps
  5. step : Aiming Your Headlights (7:30)
    • Park 20' from a wall
    • Using a Phillips screw driver in the holes above the light, adjust the angle
    • One adjusts the light vertically
    • The other adjusts the light horizontally
    • Low beam should be pointing straight ahead. The concentration of light should be one inch below the bulb
    • High beam should be pointing straight ahead. The concentration of light should be lined up with the bulb

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Excellent Product and Price
My headlights were beyond repair with scratches, foggy, yellow, cracked, and the corner light fell off on the freeway after the spring lock snapped off. No products worked for me and after the corner light fell off it was time to bite the bullet.

Expecting to pay 500 bucks or more for a full set from Volkswagen I was glad to see that there were good aftermarket options. The price at 1A was comparable but what drew me in was the help that 1A provided with a recent Wheel Bearing replacement video for my Yukon Denali.

I ordered and the pets delivered within the week via UPS Ground. had the whole set of corner, headlights, and side markers replaced in about an hour or so. They look great!

Thanks 1A for economical solution and for the video help on the wheel bearing for 2003 Yukon Denali and heals light replacement for 1999 Passat.
July 7, 2016
Passat lighting kit for 1999 VW
1A Auto was nothing less than terrific. They kept me updated from the point of sale through delivery. The product was perfectly protected and packaged and was exactly what I ordered. I would highly recommend them to anyone wishing to purchase parts!
July 2, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
What bulbs does it use? I ask because this will be my 3rd set of headlights for this car in 16 years. I have looked at a lot of differently brands. Some are wired differently and use different types of bulb combination. This is because so many are imported, and different countries have different regulations and standards for headlights, and light patterns. The original USA issued headlamps that came in the car, took a 9003 bulb and a H7 bulb on each side. Others take two 7H, and make step on off switch operate differently. Let me know what you know about these. THANK YOU!!
SAnthony on Jul 6, 2016
BEST ANSWER: Depending on what model vehicle you want these for may make a difference. I see they are VIN specific on certain year models. These will use OEM lights bulbs for the correct year model rages we offer them for.

1998-2000 VW Passat Headlight and Corner Light Kit
2001 VW Passat Headlight and Corner Light Kit (Built Before VIN 049999)

If you buy for the wrong application or incorrect year range or VIN ID, you will run into bulb issues.

Vehicle Fit

  • 1998-2000 VW Passat 4 Piece Set Lighting Kit
  • 2001 VW Passat (Built Before VIN 049999) 4 Piece Set Lighting Kit

This part replaces:

  • TYC 20-5764-01
  • TYC 20-5763-01
  • TYC 18-5450-90-1
  • TYC 18-5449-90-1
  • Hollander 114-58535R
  • Hollander 116-58696L
  • Hollander 116-58696R
  • OE # 3B0 941 017 Q
  • OE # 3B0 941 018 Q
  • OE # 3B0 953 041 D
  • OE # 3B0 953 042 D
  • Partslink VW2502112
  • Partslink VW2503112
  • Partslink VW2530105
  • Partslink VW2531105
Part #: 1ALHT00063


How-to Video:

(08:26 min)