Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • LH (Driver Side)
  • Includes lens, housing
  • Bulbs not included
  • For 2001 models, fits vehicles with VIN up to 049999
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Replacing Drivers Side Headlight Bulbs (1:07)
    • Remove the dust cover
    • Squeeze retainer clip
    • Pull the light out carefully.
    • Bulb pulls free from socket
    • Replace bulb
    • Put the light back into place by squeezing the retainer clip
    • But the dust cover back on
  2. step : Replacing Passenger Side Headlight Bulbs (2:56)
    • Remove the air intake panel
    • Using a Phillips screwdriver remove the screws on the air intake duct behind light
    • Remove the dust cover
    • Squeeze retainer clip
    • Pull the light out carefully.
    • Bulb pulls free from socket
    • Replace bulb
    • Put the light back into place by squeezing the retainer clip
    • But the dust cover back on
    • Line up and replace the air intake duct and screws
  3. step : Removing a Headlight Assembly (4:15)
    • Pull the white ring behind the headlight
    • Reach in behind the light and pull the side light free
    • Remove the two caps above the light to access the screws
    • Remove the two T20 screws on the top and the one on the side of the headlight
    • Pull the light free. First away from the grill and then out
    • Disconnect the wires
  4. step : Reinstalling a Headlight Assembly (5:52)
    • Plug the wiring harness in to the light
    • Line up the tabs on the light and push it into place. Sliding the light to the side to secure it
    • Replace the T20 screws by hand, and tighten firmly
    • Twist the bulb for the side light back into the assembly
    • Line up the tabs and push the light in to place
    • Pull back the white ring and latch it to secure the light
    • Replace the screw caps
  5. step : Aiming Your Headlights (7:30)
    • Park 20' from a wall
    • Using a Phillips screw driver in the holes above the light, adjust the angle
    • One adjusts the light vertically
    • The other adjusts the light horizontally
    • Low beam should be pointing straight ahead. The concentration of light should be one inch below the bulb
    • High beam should be pointing straight ahead. The concentration of light should be lined up with the bulb

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2000Volkswagen Passat VW Passat Headlight Driver Side
2001Volkswagen Passat VW Passat (Built Before VIN 049999) Headlight Driver Side
Part #: 1ALHL00729


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:26 min)