Volkswagen Golf Jetta Windshield Washer Reservoir - 1AWWR00138

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Our windshield washer reservoirs are some of the highest quality replacements on the market! This windshield washer bottle has been designed to replace the original designs.


  • Brand New Washer Bottle
  • Direct replacement
  • Washer pump NOT included
  • Correct for models with Low Fluid Sensor (not included)

Note:  For models noting country of origin, please refer to the first digit of your VIN number.  This number can be found in the lower driver side corner of the windshield on the dash.  "W" refers to German built models, "9" refers to Brazilian built models.

Now you can buy a high quality windshield washer reservoir that is built to strict quality control standards. REPLACE your broken or cracked one now with this great fitting washer tank.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

    Check where your vehicle was made. Instructions for Germany will be slightly different than these (Mexico).

  1. step : Removing the Washer Bottle (0:42)
    • Disconnect the washer pump harness with a flat blade screwdriver
    • Disconnect the sensor wiring harness
    • Remove the 10mm bolt on the top and bottom of the washer bottle
    • Push the washer bottle to the center of the vehicle and pull it up and out
  2. step : Disconnecting the Washer Bottle (1:30)
    • Use a flat blade screwdriver to pry off the washer hose
    • Promptly cover the hole with your finger
    • Drain the washer fluid
    • Pry off the level sensor with a flat blade screwdriver
    • Pry out the washer pump
    • Remove the gasket
    • Remove the screen
  3. step : Connecting the Washer Bottle (2:07)
    • Push the washer pump into the new washer bottle
    • Connect the level sensor
    • Swap over the screen
    • Connect the gasket
  4. step : Installing the Washer Bottle (2:22)
    • Line up the gasket with its hole
    • Align the washer bottle into place
    • Insert and tighten the 10mm bolts
    • Connect the washer hose
    • Connect the washer pump harness
    • Connect the sensor wiring harness
    • Replace the washer fluid

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Windshield Washer Fluid

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Can the rubber seals for the pump and the low level sensor be purchased separately?
Keith D May 29, 2017
You should be able to purchase them locally.
Alex P May 30, 2017
Year Make Model Description
2000-2005Volkswagen Golf VW Golf with Low Fluid Sensor (German Built Models (1st VIN Digit W)) Windshield Washer Reservoir
2006Volkswagen Golf VW Golf with Low Fluid Sensor (German Built Models (1st VIN Digit W)) Windshield Washer Reservoir (8th Vin Digit J)
2001Volkswagen Jetta VW Jetta with Low Fluid Sensor Wagon Windshield Washer Reservoir for Models with 5.5 Liter Tank
Only 1 left in stock
Part #: 1AWWR00138

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:32 min)