Replaces

Volkswagen Golf Jetta Window Regulator Dorman 752-333 - 1AWRG02558

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   without Motor

Specifications:

  • RH (Passenger Side)
  • Does NOT include power window motor
  • Direct replacement
  • Built to strict quality control standards

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

We are committed to offering the absolute best value for our customers. If you want a highest quality window regulator at a great price, please see our other "High Quality" window regulator listings. If price is your main concern, we are offering this economy style window regulator as well. It is the same one that most internet sellers are offering. While this window regulator is a good replacement, it is not backed by the same warranty as our high quality regulator.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Interior Door Panel (0:38)
    • Pry up the window switch panel with a flat blade screwdriver
    • For the passenger side, pull out the pull handle
    • Remove the inner handle
    • Remove the two T30 Torx screws behind the inner handle
    • Remove the three T20 Torx screws on the bottom of the panel
    • Remove the T20 Torx screw at the front top corner of the door panel
    • Pry out the door panel
    • Lift the door panel up and off
    • Disconnect the latch cables from the door handle
    • Disconnect the speaker wiring lead
    • Disconnect the trunk switch wiring harness
  2. step : Removing the Exterior Door Panel (2:43)
    • Pry off the side panel on the door
    • Loosen the T20 Torx bolt from the lock bezel
    • Remove the lock bezel
    • Pry the door handle out
    • Pry the clip on the door handle to release it from the latch
    • Remove the door handle
    • Remove the series of T30 Torx bolts lining the door
    • Remove the T20 Torx screws from the outside of the door
    • Pull the exterior door panel off
  3. step : Removing the Window Regulator (5:01)
    • Disconnect the two window motor leads
    • Remove the three T25 Torx screws from the window motor
    • Remove the window motor
    • Loosen the two T30 Torx bolts that hold the window to the regulator
    • Raise the window out by hand
    • Remove the four T30 Torx bolts from the regulator
    • Remove the four T30 Torx bolts from the regulator plate
    • Pull the window regulator out through the door
  4. step : Reinstalling the Regulator (6:40)
    • Insert the window regulator into place
    • Insert the four T30 bolts into the regulator
    • Insert the four T30 bolts into the regulator plate
    • Insert the window motor into place
    • Tighten the three T25 Torx screws to the window motor
    • Connect the window motor wiring leads
  5. step : Reinstalling the Interior Door Panel (7:47)
    • Connect the trunk switch wiring harness
    • Connect the speaker wiring lead
    • Connect the latch cables to the door handle
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the T30 screws into the door panel bracket
    • Insert the T20 screw at the top front corner of the door panel
    • Insert the three T20 screws at the bottom of the door panel
    • Slide the interior door handle into place
    • Push the switch panel in place
  6. step : Reinstalling the Exterior Door Panel (9:16)
    • Lower the window onto the regulator
    • Insert the two T30 bolts that hold the window to the regulator
    • Line up the exterior door panel
    • Push the exterior door panel into place
    • Twist in the longer T30 screws to hold the exterior panel in place
    • Insert the T20 Torx screw to the door panel
    • Insert the T30 screws to the exterior door panel
    • Latch the door handle cable to the door handle
    • Push the door handle into the door
    • Push the lock bezel into place
    • Insert the T20 screw to the lock
    • Push the side panel into place

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver
  • T25 Torx Driver
  • T30 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2011-2012Volkswagen Golf VW Golf Wagon Front Window Regulator without Motor Passenger Side Dorman 752-333
2005-2010Volkswagen Jetta VW Jetta Front Window Regulator without Motor Passenger Side Dorman 752-333
Only 2 left in stock
Part #: 1AWRG02558


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Dorman
Brand #: 752-333

How-to Video:

(12:43 min)