Replaces

Volkswagen Golf Jetta Strut & Spring Assembly Monroe Quick-Strut 171933 - MNSTS00040

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the top of the strut (1:05)
    • Pop the hood and secure it.
    • Apply penetrating oil to the 21 mm nut at the top of the strut.
    • Use a 7 mm Allen wrench to secure the bolt and use your 21 socket and ratchet to remove the nut.
  2. step : Remove the wheel (3:12)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  3. step : Remove the bottom of the strut (4:15)
    • Use a breaker bar and penetrating oil to unbolt the 18 mm strut bolts on the bottom
    • Remove the ABS bracket with your 10 mm socket and ratchet
    • Pull the strut down and out.
  4. step : Install the new strut (7:03)
    • Bolt the strut back in, torquing your 14 mm bolts to 35-45 ft lbs
    • Insert your spindle to the lower end of the strut and raise your control arm until the bolt holes line up.
    • Torque the bottom 18 mm nut to 85 ft lbs
    • Replace your ABS bracket with your 10 mm socket and ratchet.
  5. step : Replace the wheel (11:15)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs using a star pattern.

Tools needed for replacement:

    Allen Wrenches

  • 7mm Allen Wrench

  • General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Pipe Wrench
  • Lug Wrench

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 20mm Socket
  • 19mm Socket
  • 18mm Socket
  • 21mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 18mm Wrench
  • 12mm Wrench
  • 14mm Wrench
  • 16mm Wrench
  • 17mm Wrench
  • 11mm Wrench
  • 15mm Wrench
  • 10mm Wrench
  • 13mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1993-1998Volkswagen Golf VW Golf Front Strut & Spring Assembly L4 2.0L Driver or Passenger Side without ABS Brakes Monroe Quick-Strut 171933
1985-1992Volkswagen Jetta VW Jetta Front Strut & Spring Assembly L4 1.8L 8 Valve Driver or Passenger Side Monroe Quick-Strut 171933
1985-1992Volkswagen Jetta VW Jetta Front Strut & Spring Assembly L4 1.6L Diesel Driver or Passenger Side Monroe Quick-Strut 171933
1990-1998Volkswagen Jetta VW Jetta Front Strut & Spring Assembly L4 2.0L Driver or Passenger Side Monroe Quick-Strut 171933
Only 2 left in stock
Part #: MNSTS00040


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Monroe Quick-Strut
Brand #: 171933

How-to Video:

(11:49 min)