This replacement power window regulator is just what you need to get your vehicle in good shape again!

Specifications:

  • LH (Driver Side) FRONT DOOR
  • Does NOT include the power window motor
  • Power operation
  • Direct replacement
  • Built to strict quality control standards
  • Not correct for Convertible Models

This power window regulator makes a great replacement and has good cost savings over a dealer unit.

 

Please Note:  This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this window regulator does not fit the application stated.
    •  This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.
Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the door panel (1:10)
    • Use a putty knife to carefully pry off the door pull.
    • Use a Phillips screwdriver to remove the three screws now exposed.
    • Remove the three T20 screws on the bottom of the door panel.
    • Use a door panel clip tool or a putty knife to pry off the door panel.
    • Lift the door panel up and off.
    • Disconnect the wiring from the back of the door panel.
  2. step : Remove the inner door panel. (4:05)
    • Pull out the plugs in the inner door panel to reveal T30 screws.
    • Remove the T30 screws that secure the regulator motor.
    • Disconnect the window motor and carefully pull the window regulator motor off.
    • Position the window in place to access the two exposed T30 screws better.
    • Unscrew the T30 screws.
    • Tape up the window.
    • Unplug your speaker.
    • Remove the wiring harness from the clips anchoring it to the inner door panel.
    • Remove the 10 mm bolts securing the inner door panel.
    • Pry the inner door panel off with a flat blade screwdriver.
    • Carefully remove the inner door panel, working around the door lock.
    • Unplug the last wiring harness and unthread the cables from the inner door panel.
  3. step : Remove and replace the window regulator. (8:40)
    • Use a drill to remove the rivets to remove the window actuator.
    • Install the new window regulator using flat head bolts to replace the rivets.
  4. step : Install the inner door panel. (9:55)
    • Thread all the cabling and wiring back through the inner door panel.
    • Bolt the panel back in place with a 10 mm socket and ratchet.
    • Plug all the wiring back in.
    • Untape the window and guide it back into place on the regulator tracks.
    • Bolt the window regulator motor back in and screw in all the T30 screws.
    • Pin all the wiring harnesses back into their neat little anchoring clips on the inner panel.
  5. step : Put the interior outer door panel back on. (14:20)
    • Check out our other videos for more detailed instructions on the re-installation of the interior outer door panel.

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 3/8 Inch Drill Bit

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver
  • T30 Torx Driver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
easy fit, quick fix
using the attached video, my daughter and I were able to install the regulator and get her back on the road in less than an hour. additionally this regulator had the mounting studs on it. Great product and great service. I will use 1AAuto exclusively.
November 13, 2017
Purchased
5 months ago
Window regulator
Window regulator works great would buy again if I ever needed to
September 20, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
I have a manual window will this work or what do I need I cannot find one for a manual window?
Mandy G on Jul 29, 2017
BEST ANSWER: We do not currently carry this part for your vehicle. You can try searching a website called Partfinder.com, which you can find here: http://www.partfinder.com. If you have any questions about other parts we carry, please feel free to give us a call or send us an email.

Vehicle Fit

  • 1998-2002 VW Beetle Front Power Window Regulator without Motor Driver Side
  • 2003-2010 VW Beetle Hatchback Front Power Window Regulator without Motor Driver Side

This part replaces:

  • Hollander 125-61600L
  • Hollander 125-60606L
  • Hollander 125-61576
  • OE # 1C0837655C
  • Dorman 749-531
Part #: 1AWRG01340

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(15:23 min)