Replaces

Volkswagen Beetle Golf Jetta Steering & Suspension Kit - 1ASFK03684

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a Set of 12
  • Direct replacements
  • Built to strict quality control standards

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Lower Control Arms
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 12 Piece Set
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Steering Rack & Pinion Bellows
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:55)
    • Remove the lug nut caps with a 7mm Allen bit
    • Insert the lug nut key into the locking lug nut
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:47)
    • Measure the distance from the inner tie rod boot to the end of the outer tie rod
    • Record that measurement
    • Loosen the 22mm nut that attaches the inner tie rod to the outer tie rod
    • Use a 6mm Allen wrench and a 19mm wrench to remove the nut at the bottom of the tie rod end
    • Loosen the tie rod by striking the steering knuckle with a hammer
    • Pull the tie rod up and out of the steering knuckle
    • Twist off the outer tie rod
  3. step : Installing the New Outer Tie Rod (2:48)
    • Twist the new outer tie rod onto the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the nut onto the outer tie rod with a 19mm wrench and a 6mm Allen wrench
    • Tighten the 19mm nut to 50 foot-pounds of torque
    • Measure the distance from the inner tie rod boot to the end of the outer tie rod
    • Check that this is the same distance as recorded in Step 2
    • Tighten the 22mm nut that attaches the inner tie rod to the outer tie rod
  4. step : Reattaching the Wheel (3:43)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Attach the lug nut covers

Tools needed for replacement:

    Allen Wrenches

  • 6mm Allen Wrench
  • 7mm Allen Wrench

  • General Tools

  • Measuring Tape
  • Hammer
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 17mm Socket

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Priced well
My parts came in quick and were priced very well.
March 26, 2018
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1998-2000Volkswagen Beetle VW Beetle 12 Piece Set Steering & Suspension Kit
1999Volkswagen Golf VW Golf 12 Piece Set Steering & Suspension Kit for Models with 23mm Diameter Sway Bar (Built After 9/98 Production Date)
2000-2006Volkswagen Golf VW Golf 12 Piece Set Steering & Suspension Kit for Models with 23mm Diameter Sway Bar
1999Volkswagen Jetta VW Jetta 12 Piece Set Steering & Suspension Kit for Models with 23mm Diameter Sway Bar (Built After 9/98 Production Date)
2000-2005Volkswagen Jetta VW Jetta 12 Piece Set Steering & Suspension Kit for Models with 23mm Diameter Sway Bar

This part replaces:

  • Moog K90357
  • Moog K90355
  • Hollander 512-58513AL
  • Moog ES3524
  • Moog ES3525
  • Dorman 520-760
  • Moog K640176
  • Beck Arnley 102-5884
  • Moog EV400
  • Hollander 512-58513AR
  • Beck Arnley 103-2905
  • Moog K90435
  • OE # 1J0422812B
  • OE # 1J0407365C
  • OE # 1J0422831B
  • OE # 1J0407151B
  • OE # 1J0407151C
  • OE # 1J0407365H
  • OE # 1J0407366H
  • OE # 1J0422811B
  • OE # 1J0411315G
  • OE # 1J0422804
Only 2 left in stock
Part #: 1ASFK03684


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:33 min)