Replaces

Volkswagen Beetle Golf Jetta Steering & Suspension Kit - 1ASFK01884

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Remove the lug nut covers with a 7mm Allen bit
    • Push the lug nut key into the special lug nut
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Lower Control Arm (1:37)
    • Remove the first 18mm bolt from the control arm with a ratchet and pipe for leverage
    • Loosen the second 18mm bolt with the ratchet and pipe
    • Hold the bolt with an 18mm wrench
    • Remove the second 18mm bolt with the ratchet
    • Remove the 16mm bolt from the sway bar link
    • Attach locking pliers between the wheel knuckle and the ball joint nut
    • Remove the ball joint nut with a 19mm wrench
    • Pull the wheel aside
    • Pull the control arm down and out
  3. step : Removing the Ball Joint from the Control Arm (3:20)
    • Remove the three 13mm bolts that hold the ball joint in place
    • Pull the ball joint out of the control arm
  4. step : Attaching the New Ball Joint to the Control Arm (3:33)
    • Put the new ball joint into place on the control arm
    • Put the ball joint bracket into place
    • Thread the 13mm bolts through from the bottom
    • Tighten the 13mm bolts to 40 foot-pounds of torque
  5. step : Installing the Lower Control Arm (4:10)
    • Push the control arm into place
    • Tap it into place with a hammer if necessary
    • Push the 18mm bolts and associated nuts into place
    • Push the ball joint into the wheel knuckle
    • Put the 19mm nut onto the ball joint
    • Tighten the 19mm nut
    • Tighten the 18mm bolts to 70 foot-pounds
    • Insert the 16mm bolt into the sway bar link
  6. step : Reattaching the Wheel (6:08)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the lug nut caps

Tools needed for replacement:

    Allen Wrenches

  • 7mm Allen Wrench

  • General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 16mm Socket
  • 17mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 19mm Wrench
  • 13mm Wrench
  • 18mm Wrench

4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
0
0
0
Fits perfect!
Swapped everything out and no problem. However I have a GLI and the factory spring is lower than the new one on the strut so I had to use the old one. I wish I would have noticed or known that. I had to take it back out because it sat too high in the front.
January 22, 2017
Purchased
1 year ago
All parts received fit exactly like they were suppose to and the vehicle is corrected and back on the road shortly, thank you.
June 27, 2017
Purchased
10 months ago
For: 1ASFK01884-Volkswagen Beetle Golf Jetta Steering & Suspension Kit
Great deal great parts great driving thanks to you at 1A Auto
June 19, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
are the strut bearings included as part of the strut assembly?
Brandon M on Jul 5, 2017
BEST ANSWER: Yes, the bearings are included in the assemblies.

Vehicle Fit

  • 1998 VW Beetle (Built After 6/98 Production Date) 8 Piece Set Steering & Suspension Kit
  • 1999-2010 VW Beetle 8 Piece Set Steering & Suspension Kit
  • 1999 VW Golf (8th Vin Digit J) (Built After 10/98 Production Date) 8 Piece Set Steering & Suspension Kit
  • 2000-2003 VW Golf 8 Piece Set Steering & Suspension Kit
  • 2004 VW Golf (excluding R32 Models) 8 Piece Set Steering & Suspension Kit
  • 2005 VW Golf 8 Piece Set Steering & Suspension Kit
  • 2006 VW Golf (8th Vin Digit J) 8 Piece Set Steering & Suspension Kit
  • 1999 VW Jetta (8th Vin Digit M) (Built After 10/98 Production Date) 8 Piece Set Steering & Suspension Kit
  • 2000-2004 VW Jetta 8 Piece Set Steering & Suspension Kit
  • 2005 VW Jetta (8th Vin Digit J or M) (Built Before 12/30/04 Production Date) 8 Piece Set Steering & Suspension Kit

This part replaces:

  • Moog K90355
  • Moog K90357
  • Moog ES3709A
  • Moog ES3710A
  • Moog K640176
  • Beck Arnley 102-5884
  • Dorman 520-760
  • Hollander 527-59623
  • Hollander 512-58513AL, 512-58513AR
  • OE # 1J0422803H
  • OE # 1J0422804H
  • OE # 1J0 407 151 C, 1J0 407 151B
  • OE # 1J0407365H, 1J0407365C
  • OE # 1J0407366H
  • Monroe 181525
  • Monroe 171525
  • KYB SR4052
Part #: 1ASFK01884


How-to Video:

(07:03 min)