Replaces

Volkswagen Beetle Golf Jetta Brake Kit Nakamoto CD340, CD768ES, 34143-DSZ, 34144-DSZ - 1APBS00328

This performance brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement
  • For models with Female oval sensor connector

Brake Rotor Specifications:

  • Comes as a set of 4
    • Includes both LH (Driver) & RH (Passenger) Side FRONT & REAR
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Lug Wheels
  • Front: 
    • 11.02" (280mm) diameter
    • Vented
  • Rear:
    • 9.13" (232mm) diameter
    • Solid

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Remove the lug nut covers with a 7mm Allen Wrench
    • Insert the lug nut key into the locking lug nut
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • If the wheel will not come off, thread one lug nut and use a pry bar to loosen the wheel
  2. step : Inspecting the Brakes (1:54)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (2:04)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver
    • Pry the caliper off with a flat blade screwdriver
    • Pull the caliper aside
    • Pull off the brake pads by hand
  4. step : Removing the Brake Rotor (2:39)
    • Remove the two 8mm Allen bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips head screw from the rotor
    • If the screw will not remove, drill it out
    • Pull the rotor off
  5. step : Preparing the New Brakes (3:17)
    • Put a large C-clamp on to the brake caliper
    • Apply pressure to the brake piston
    • Twist the piston in with slip joint pliers and adjust the C-clamp to maintain pressure
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Clean the brake pad slides with a wire brush
    • Check the caliper slides for smooth movement
    • If the caliper slides do not move smoothly, clean them and apply grease
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
  6. step : Installing the New Brake Rotor (4:54)
    • Slide the rotor on
    • Insert the Phillips screw into the brake rotor
    • Put the bracket back into place
    • Start the two 8mm Allen bolts by hand
    • Tighten the bolts to 50 foot-pounds of torque
  7. step : Installing the New Brake Pads (5:42)
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten the two 13mm bolts
  8. step : Reattaching the Wheel (6:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Remove the lug nut key
    • Put on the lug nut caps
  9. step : Testing the Brakes (6:55)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Allen Wrenches

  • 7mm Allen Wrench
  • 8mm Allen Wrench

  • General Tools

  • Large C-Clamp
  • Floor Jack
  • Jack Stands
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Cloth Rags
  • Mineral Spirits
  • Brake Parts Cleaner
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Brake job
Exceeded my expectations. Cheeper and better quality than AutoZone, Advance, and orielly.
December 18, 2017
Purchased
2 months ago
Nice quality
So far, so good. Not too many miles on them yet, but I was impressed by the quality so I purchased a set for my wifes Audi Q7.
December 15, 2017
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(07:25 min)

Tools List:

    Allen Wrenches

  • 7mm Allen Wrench
  • 8mm Allen Wrench

  • General Tools

  • Large C-Clamp
  • Floor Jack
  • Jack Stands
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Cloth Rags
  • Mineral Spirits
  • Brake Parts Cleaner
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket



This part replaces:

  • Nakamoto CD340, CD768ES, 34143-DSZ, 34144-DSZ

Vehicle Fit

  • 1998-2006 VW Beetle Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit L4 1.9L Diesel Female Oval Sensor Connector Performance Nakamoto
  • 1998-2005 VW Beetle Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit L4 2.0L Female Oval Sensor Connector Performance Nakamoto
  • 2009-2010 VW Beetle Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit L5 2.5L Performance Nakamoto
  • 2000-2006 VW Golf Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit L4 2.0L Female Oval Sensor Connector Performance Nakamoto
  • 2000-2006 VW Golf Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit L4 1.9L Diesel Female Oval Sensor Connector Performance Nakamoto
  • 1999 VW Jetta Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit L4 2.0L & 5 Lug Wheels (Built After 7/99 Production Date) Performance Nakamoto
  • 2000-2004 VW Jetta Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit L4 2.0L Performance Nakamoto
  • 2000-2004 VW Jetta Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit L4 1.9L Diesel Performance Nakamoto
  • 2005 VW Jetta Cross Drilled & Slotted Front & Rear Premium Posi Brake Kit Zinc Coated Ceramic Performance L4 2.0L (8th Vin Digit J or M) Nakamoto
  • 2005 VW Jetta Front & Rear Zinc Coated Cross Drilled & Slotted Premium Posi Ceramic Brake Kit L4 1.9L Diesel (8th Vin Digit J or M) Performance Nakamoto
Part #: 1APBS00328

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD340, CD768ES, 34143-DSZ, 34144-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More