The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition. In engines like this with one coil per cylinder you can diagnose a coil by putting a timing light on each one to make sure it is lighting the light consistently.

This Coil Over Plug Ignition Coil features the following specifications:

  • Brand New
  • Replaces dealer part number: 07K 905 715 F, 07K 905 715, 07K905715F, 07K905715
  • Built to strict quality control standard
  • Direct replacement
  • 100% factory tested
  • Correct for models with black coil plug connector
  • Set of 5

This coil is for a distributorless application. Sold as a EACH. Replace individually as needed.

 

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Ignition Coil (0:41)
    • Remove the two T20 Torx screws from the wiring harness
    • Disconnect the ignition coil wiring harness
    • Remove the wiring harness from the coils
    • Gently pry the ignition coil up and out
  2. step : Installing the Ignition Coils (1:47)
    • Insert the ignition coil into place
    • Push the wiring harness firmly into place
    • Tighten the two T20 screws to the ignition coil wiring harness

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Will the ignition coils work for all 2006 VW New Beetle 2.5L 5 inline Cyl models? Would it fix a misfiring code? Also, would it possibly fix smoke coming out of exhaust pipe? I know there are many possibilities, but I asked if you have any ideas about the said issues.
Hello M on May 8, 2017
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. Unfortunately we are not able to diagnose issues, so we recommend you take your car to a certified mechanic to have it looked at.

How-to Video:

(02:41 min)

Tools List:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver




Vehicle Fit

  • 2006-2010 VW Beetle Ignition Coil 5 Piece Set L5 2.5L
  • 2010-2016 VW Golf Ignition Coil 5 Piece Set L5 2.5L
Part #: 1AERK00195

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More