Replaces

Vent Window Motor Pair Dorman 948-300, 948-301 - 1AVMK00001

These power vent window motors are just what you need to get your vehicle in good shape again!

Specifications:

  • Comes as PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR VENT WINDOW
  • Replaces dealer part numbers: 4717606AB, 4717607AB
  • Direct replacements
  • Built to strict quality control standards
  • New, not rebuilt
    • No core charges

These vent window motors make great replacements and have good cost savings over the dealer units.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Accessing the Vent Window Motor (0:40)
    • Pull back the seat belt trim
    • Remove the 15mm bolt from the seat belt
    • Pull off the lower liftgate trim
    • Pull the upper liftgate trim down on one side
    • Pull off the side liftgate trim
  2. step : Removing the Vent Window Motor (1:32)
    • Pry the clip out of the vent window motor arm with a flat blade screwdriver
    • Remove the three 10mm bolts from the vent window motor
    • Disconnect the vent window motor wiring harness with a flat blade screwdriver
  3. step : Installing the New Vent Window Motor (2:19)
    • Start the clip into the new vent window motor's arm
    • Put the new vent window motor into place
    • Push in the vent window motor arm clip
    • Start the three 10mm bolts into the vent window motor
    • Tighten the three 10mm bolts
    • Connect the vent window motor wiring harness
    • Turn on the vehicle's ignition
    • Test the power vent window
  4. step : Reattaching the Seatbelt and Trim (3:16)
    • Make sure all the clips are in the side trim panel
    • If any remained in the frame, remove them with needle nose pliers
    • Push the side trim panel into place using the locating tabs
    • Pull the weather strip around the trim panel
    • Push the trim panel clips in
    • Push the upper liftgate trim panel on, pulling the weatherstrip around it
    • Put the seatbelt into place
    • Tighten the 15mm bolt into the seatbelt
    • Put the seatbelt trim back on
    • Push the lower liftgate trim into place, starting at one side
    • Pull the weather strip over the lower liftgate trim panel

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2016 Chrysler Town & Country Vent Window Motor Pair Dorman 948-300, 948-301
  • 2001-2003 Chrysler Voyager Vent Window Motor Pair Dorman 948-300, 948-301
  • 2001-2007 Dodge Caravan Vent Window Motor Pair Dorman 948-300, 948-301
  • 2001-2017 Dodge Grand Caravan Vent Window Motor Pair Dorman 948-300, 948-301

This part replaces:

  • Dorman 948-300, 948-301
Part #: 1AVMK00001

Out of Stock

Dorman
Brand #: 948-300, 948-301

How-to Video:

(06:49 min)