Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This power vent window motor is just what you need to get your vehicle in good shape again!


  • Fits LH (Driver Side) REAR VENT WINDOW
  • Replaces dealer part number: 4717607AB
  • Direct replacement
  • Built to strict quality control standards
  • New, not rebuilt
    • No core charge

This vent window motor makes a great replacement and has good cost savings over a dealer unit.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Accessing the Vent Window Motor (0:40)
    • Pull back the seat belt trim
    • Remove the 15mm bolt from the seat belt
    • Pull off the lower liftgate trim
    • Pull the upper liftgate trim down on one side
    • Pull off the side liftgate trim
  2. step : Removing the Vent Window Motor (1:32)
    • Pry the clip out of the vent window motor arm with a flat blade screwdriver
    • Remove the three 10mm bolts from the vent window motor
    • Disconnect the vent window motor wiring harness with a flat blade screwdriver
  3. step : Installing the New Vent Window Motor (2:19)
    • Start the clip into the new vent window motor's arm
    • Put the new vent window motor into place
    • Push in the vent window motor arm clip
    • Start the three 10mm bolts into the vent window motor
    • Tighten the three 10mm bolts
    • Connect the vent window motor wiring harness
    • Turn on the vehicle's ignition
    • Test the power vent window
  4. step : Reattaching the Seatbelt and Trim (3:16)
    • Make sure all the clips are in the side trim panel
    • If any remained in the frame, remove them with needle nose pliers
    • Push the side trim panel into place using the locating tabs
    • Pull the weather strip around the trim panel
    • Push the trim panel clips in
    • Push the upper liftgate trim panel on, pulling the weatherstrip around it
    • Put the seatbelt into place
    • Tighten the 15mm bolt into the seatbelt
    • Put the seatbelt trim back on
    • Push the lower liftgate trim into place, starting at one side
    • Pull the weather strip over the lower liftgate trim panel

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 10mm Socket

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Exact fit
Fit together just fine and is faster then original...
June 29, 2017
R they were very helpful for me and they help me get the right part he was very understanding and gave me a lot of information on the part and the part was received to my house very fast and efficient so they did a wonderful excellent job they were outstanding and I thank them very much
October 30, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2016Chrysler Town & Country Chrysler Town & Country Vent Window Motor Driver Side Dorman 948-300
2001-2003Chrysler Voyager Chrysler Voyager Vent Window Motor Driver Side Dorman 948-300
2001-2007Dodge Caravan Dodge Caravan Vent Window Motor Driver Side Dorman 948-300
2001-2017Dodge Grand Caravan Dodge Grand Caravan Vent Window Motor Driver Side Dorman 948-300
Part #: 1AVWM00001

Out of Stock

Brand #: 948-300

How-to Video:

(06:49 min)