Replaces

Vapor Canister Vent Valve Dorman 911-500 - 1AEMX00025

This replacement Vapor Canister Vent Valve or solenoid is a new aftermarket part.

It mounts to the vapor canister and is used to seal the canister vent. It is controlled by the vehicles main computer or ECM. When the ECM sends the activation signal, a plunger in the valve will move to seal the vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative loss system components. This solenoid valve is used only for diagnosis, and usually remains opened. When the vent is closed, under normal purge conditions, the evaporative loss system is depressurized and allows "EVAP Control System (Small Leak)" diagnosis. If this valve is defective, the Check Engine Light will illuminate to Set with Small Leak Diagnosis. Some of the trouble codes associated with this part being defective are: P1456, P1448, and P0455.

Features:

  • Brand new component with correct connector
  • Replaces dealer part numbers: 14935-54U06, 14935-54U1A, 1493554U06, 1493554U1A
  • Usually attaches to vapor canister
  • Built to strict quality control standards
  • Includes new mounting hardware for complete installation

Over time and daily use the electronic valve can wear out causing the check engine light to set. If the valve is the problem, replace it now with this great alternative.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Does this have the inset to it where the o-rings goes into ? Does not look like it according to picture. Thanks
justin h on Mar 19, 2017
BEST ANSWER: From our photos it doesn't appear there is an inset for an o-ring.

Vehicle Fit

  • 1996 Infiniti I30 Vapor Canister Vent Valve V6 3.0L California Emissions Dorman 911-500
  • 1997 Infiniti I30 Vapor Canister Vent Valve V6 3.0L (Built Before 4/97 Production Date) Dorman 911-500
  • 1997 Infiniti QX4 Vapor Canister Vent Valve V6 3.3L Dorman 911-500
  • 1997 Nissan 200SX Vapor Canister Vent Valve L4 1.6L (Built Before 4/97 Production Date) Dorman 911-500
  • 1995-1998 Nissan 240SX Vapor Canister Vent Valve L4 2.4L Dorman 911-500
  • 1996 Nissan D21 Hardbody Pickup Vapor Canister Vent Valve L4 2.4L Dorman 911-500
  • 1997 Nissan D21 Hardbody Pickup Vapor Canister Vent Valve L4 2.4L (Built Before 5/97 Production Date) Dorman 911-500
  • 1995 Nissan Maxima Vapor Canister Vent Valve V6 3.0L (Built After 5/95 Production Date) Dorman 911-500
  • 1996 Nissan Maxima Vapor Canister Vent Valve V6 3.0L Dorman 911-500
  • 1997 Nissan Maxima Vapor Canister Vent Valve V6 3.0L (Built Before 4/97 Production Date) Dorman 911-500
  • 1997 Nissan Pathfinder Vapor Canister Vent Valve V6 3.3L Dorman 911-500
  • 1997 Nissan Sentra Vapor Canister Vent Valve L4 1.6L (Built Before 4/97 Production Date) Dorman 911-500
  • 1998 Nissan Sentra (Mexico Built Models 1st Vin Digit 3) Vapor Canister Vent Valve L4 1.6L Manual Transmission Dorman 911-500

This part replaces:

  • OE # 1493554U1A
  • OE # 1493554U06
  • Dorman 911-500
Part #: 1AEMX00025

Ships Same Day for orders placed by 4 P.M. ET

Dorman
Brand #: 911-500