Replaces

Vapor Canister Purge Solenoid Valve Dorman 911-079 - DMEEV00008

Dorman Vapor Canister Purge Solenoid: 911-079

Specifications:

  • Brand New Vapor Canister Purge Valve
  • Mounts near the vapor canister
  • Direct replacement
  • Built to strict quality control standards

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Evap Canister Purge Solenoid (0:49)
    • Twist off the oil cap
    • Lift off the engine cover
    • Pry the two plastic tabs out of the noise insulation with a trim tool
    • Lift the insulation up and out
    • Disconnect the electrical connectors from the evap canister purge solenoid
    • Disconnect the hoses from the solenoid
    • Remove the 10mm bolt from the solenoid bracket
    • Pull the bracket up and out
  2. step : Installing the Solenoid (3:58)
    • Connect the hoses to the solenoid
    • Put the solenoid bracket into place
    • Fasten the 10mm bolt into the bracket
    • Connect the solenoid electrical connector
    • Line up the noise insulation
    • Pop the two plastic tabs into the insulation
    • Line up the engine cover
    • Twist on the oil cap

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
parts looks different than the one i removed from my car, is this the correct fit?
israel m on May 23, 2017
BEST ANSWER: Without vehicle information we cannot confirm if the part is correct. Please give our customer service department a call at 888-844-3393. One of our representative can help verify fit with you!

Vehicle Fit

  • 2008 Buick Enclave Vapor Canister Purge Solenoid Valve Dorman 911-079
  • 2005-2008 Buick LaCrosse Vapor Canister Purge Solenoid Valve V6 3.6L Dorman 911-079
  • 2006 Buick Rendezvous Vapor Canister Purge Solenoid Valve V6 3.6L Dorman 911-079
  • 2006-2011 Cadillac CTS Vapor Canister Purge Solenoid Valve V6 3.6L Dorman 911-079
  • 2006-2009 Cadillac SRX Vapor Canister Purge Solenoid Valve V6 3.6L Dorman 911-079
  • 2010-2011 Cadillac SRX Vapor Canister Purge Solenoid Valve V6 2.8L Dorman 911-079
  • 2005-2011 Cadillac STS Vapor Canister Purge Solenoid Valve V6 3.6L Dorman 911-079
  • 2010-2011 Chevy Camaro Vapor Canister Purge Solenoid Valve V6 3.6L Dorman 911-079
  • 2008-2009 Chevy Equinox Vapor Canister Purge Solenoid Valve V6 3.6L Dorman 911-079
  • 2007-2008 GMC Acadia Vapor Canister Purge Solenoid Valve V6 3.6L Dorman 911-079
  • 2008-2009 Pontiac G8 Vapor Canister Purge Solenoid Valve V6 3.6L Dorman 911-079
  • 2008-2009 Pontiac Torrent Vapor Canister Purge Solenoid Valve V6 3.6L Dorman 911-079
  • 2007-2008 Saturn Outlook Vapor Canister Purge Solenoid Valve Dorman 911-079
  • 2008-2010 Saturn Vue Vapor Canister Purge Solenoid Valve V6 3.6L Dorman 911-079

This part replaces:

  • Dorman 911-079
  • OE # 12611801
Part #: DMEEV00008

Out of Stock

Dorman
Brand #: 911-079

How-to Video:

(05:34 min)