Specifications:

  • Valve Cover Gasket Set
  • Made from high quality materials
  • Replaces dealer part number: 11213-28021, 1121328021
  • Direct replacements
  • Built to strict quality control standards
  • Fits models with L4 2.4L Engine only

Replace that leaking valve cover gasket with this high quality replacement set!

Wear and Tear

This item is backed by a 60-day warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Ignition Coils (2:34)
    • Remove the two 10mm bolts from the engine cover
    • Disconnect the electrical connectors from each ignition coil
    • Remove the 10mm bolts from the ignition coils
    • Remove the ignition coils
  2. step : Removing the Valve Cover Gasket (5:12)
    • Remove the 10mm bolt from the bracket harnesses
    • Loosen the hose clamp on the vent hose
    • Pry off the vent hose from the engine carefully with a pick
    • Loosen the hose clamp on the PCV valve
    • Remove the PCV valve hose
    • Remove the eight 10mm bolts from the engine head
    • Remove the oil cap
    • Tap the valve cover with a rubber mallet to loosen it
    • Lift the valve cover off of the engine
    • Remove the valve cover gasket
    • Place rags on top of the engine to protect it from debris
    • Clean out the grooves on the valve cover gasket with brake parts cleaner, a trim tool, and paper towels
    • Clean the outside of the valve cover gasket with brake parts cleaner, a trim tool, and paper towels
  3. step : Installing the Valve Cover Gasket (14:40)
    • Insert the valve cover gasket into the valve cover
    • Place the valve cover onto the engine
    • Tighten the eight 10mm bolts to the cover without over-tightening
    • Tighten the oil cap
    • Insert the PCV hose on and tighten the hose clamp
    • Insert the vent hose on and tighten the hose clamp
    • Tighten the 10mm bolts to the bracket harnesses
  4. step : Installing the Ignition Coils (17:24)
    • Insert the ignition coils into place
    • Tighten the 10mm bolts to the ignition coils
    • Torque the bolts to
    • Connect the electrical connectors
    • Tighten the two 10mm bolts to the engine cover

Tools needed for replacement:

    General Tools

  • Rubber Mallet
  • Pick

  • Materials, Fluids, and Supplies

  • Gloves
  • Paper Towels
  • Cloth Rags
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2009 Pontiac Vibe Valve Cover Gasket Set L4 2.4L
  • 2005-2009 Scion tC Valve Cover Gasket Set
  • 2008-2009 Scion xB Valve Cover Gasket Set
  • 2002-2009 Toyota Camry Valve Cover Gasket Set L4 2.4L
  • 2009 Toyota Corolla Valve Cover Gasket Set L4 2.4L
  • 2001-2007 Toyota Highlander Valve Cover Gasket Set L4 2.4L
  • 2009 Toyota Matrix Valve Cover Gasket Set L4 2.4L
  • 2001-2008 Toyota Rav4 Valve Cover Gasket Set L4 2.4L
  • 2002-2008 Toyota Solara Valve Cover Gasket Set L4 2.4L
Part #: 1AEGS00177

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(19:57 min)