Universal Lighting Wiring Harness - 1ALUK00059


  • Single Switch
  • Single DT-style Connector
    • Correct for light bars 24" and under
  • Relay
  • 30A fuse
  • Wiring lengths
    • to fuse: 9-3/4" (25 cm)
    • to light: 115-3/4" (294 cm)
    • to switch: 76-3/4" (195 cm)


Universal Part Note:

This is a universal part and not a direct replacement for the existing part on your vehicle.  In some situations, modifications may be necessary for it to fit and function properly.

Off-Road Use Only:

This product is intended for off-road use only as it may not be legal for use on public roadways or highways.  It is the purchaser's responsiblity to determine their local, state, and federal laws and regulation.

What makes our LED lighting better than the rest?

  • Matched LEDs – LEDs can vary in color and brightness.  Our lights use matched LEDs for consistent color and brightness across the whole assembly.
  • Better internal wiring – Our light bars use heavier duty wiring and multiple power circuits to make sure that each LED gets optimal voltage.  In the rare case that an LED is damaged or fails, it will not cause the surrounding ones to turn off like the lower quality versions.
  • Better weatherproofing – Every one of our LED light bars is tested for leaks prior to shipment.  The lenses use a one piece molded gasket, as opposed to lower quality units that have cut-to-fit pieces that can separate from each other.
  • Better heat dissipation – Heavier duty heatsinks help to keep our LEDs shining longer.
  • Better warranty – We are so confident in the quality of our LED lights that we back them with a lifetime warranty against defects.



Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
My 2006 ss Chevy came without fog lights. Is it possible to purchase a kit assembly to install fog lights. The wiring harness is my main concern?
Tommyo on Jan 1, 2017
BEST ANSWER: Yes there is. But myself I like my driving - fog lights to remain on when I switch on my Hi-Beams. All the wiring kits will instruct you to attach your fog lights to the low beam wire only. I would just buy a cheap 12v power probe and find the wire that gives you 12v power at all times when you have either your low or high beams on. Really simple to find just turn headlights on dim and check voltage then flip to your high beams to make sure you still have 12 volts. MAKE SURE YOU DON'T CONNECT TO A WIRE THAT WILL POWER THE HI-BEAMS WHEN YOU TURN ON YOUR HEADLIGHTS OR JUST PARKING LIGHTS. HOPE I GAVE YOU SOME THOUGHTS TO CONSIDER.
Can i use these wiring to run from my fuel?
sun s on Sep 17, 2017
BEST ANSWER: No, this wiring is not for the fuel system. These are really meant for lighting accessories.

Part #: 1ALUK00059

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More