Universal Flex Pipe (1.75" x 12" Heavy Duty) Clamp On Style with (2) Muffler Clamps - 1AEMK00002


  • Size: (1.75" x 12")
    • Outside Diameter: 1.75 inches
    • Length: 12 inches
  • Material:
    • Premium quality rolled steel with a high temperature rating
  • Heavy duty double wall mesh
    • Has a inner & outer braid
  • Designed to:
    • Reduce noise, Isolate heat, Reduce vibration
    • Reduce stress on exhaust system to help prevent weld fractures
    • Replace flex pipes in transverse mounted FWD cars and custom off road vehicles
  • Can be welded or clamped on by 1 3/4" muffler clamps
    • (2) 1 3/4" Muffler Clamps are included

Note: This is for (1) fle pipe & (2) Muffler Clamps. If you would just like the flex pipe, please see our other listings.


Universal Part Note:

This is a universal part and not a direct replacement for the existing part on your vehicle.  In some situations, modifications may be necessary for it to fit and function properly.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Flex Pipe (1:01)
    • Measure your replacement flex pipe
    • Mark the measurements on the pipe
    • Cut just behind the flange on the flex pipe without cutting into the head shield or transmission
    • Cut the other end of the pipe
    • Measure the inside diameter
    • Measure the outside diameter
    • Loosen the clamp with a 17mm wrench
    • Remove the pipe
    • Use a rust disk or wire wheel to give a clean surface on the pipes for welding
  2. step : Installing the Flex Pipe (4:09)
    • Install the flex pipe
    • Weld the pipe into place and seal it
    • Repeat the process for the other side
    • Adjust the clamp accordingly
    • Tighten the 17mm nuts to the clamp

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Vernier Calipers
  • Measuring Tape
  • Wire Brush
  • Sawzall
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 17mm Socket

  • Specialty Tools

  • Acetylene torch

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Only 3 left in stock
Part #: 1AEMK00002

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(06:21 min)