Our trunk weatherstrip seal is the most accurate reproductions on the market. This is the seals that mounts to the body of the car and seals trunk lid when closed.

Features:

  • Smooth soft fine grain rubber

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Dry Fitting the Trunk Weatherstrip (1:00)
    • Remove the trunk adhesive
    • Remove any rust or scale
    • Insert the weatherstrip with the thicker side down in
    • Push the lip so it sits on the top of the trunk, then push the lip down in
    • Use a plastic spoon or trim tool to keep from scratching
    • Repeat this process as you fit the weatherstrip around
    • Cut a quarter inch beyond where the seam is with a razor blade to match the weatherstrip
    • Close the trunk to check the weatherstrip placement
  2. step : Installing the Weatherstrip (5:40)
    • Pop open the trunk
    • Loosen the striker or latch bolts and slide the striker or latch up or down to adjust the trunk
    • If the weatherstrip keeps the trunk from closing, adjust the trunk so it sits on the weatherstrip
    • After the weatherstrip has pressed down, adjust the striker or latch back in place
    • Remove the weatherstrip
    • Line the outside of the trunk channel with painter's tape
    • Place adhesive inside the line of the trunk channel near the tape
    • Place adhesive on the side of the weatherstrip that will touch down in the channel
    • Insert the weatherstrip into place
    • Repeat the process for the rest of the weatherstrip
    • Trim off any excess near the end
    • Remove the painter's tape

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper
  • Wire Brush
  • Heat Gun

  • Materials, Fluids, and Supplies

  • Painter's Tape
  • Plastic Spoon

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
1
0
0
0
Weatherstrip 68 camaro
Very fast shipping, price was great and it was definitely a better product than what was installed before I got the camaro. Installation was a breseze and fitment was spot on. I will order my weatherstripping needs from you guys going forward.
April 6, 2018
great price and product
Installed in 67 GTO fit was great, used minimum adhesive length was about 12" too long which I cut for almost seamless fit
March 1, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1973-1974 Buick Apollo Trunk Weatherstrip Seal
  • 1964-1972 Buick Gran Sport Trunk Weatherstrip Seal
  • 1964-1972 Buick Skylark Trunk Weatherstrip Seal
  • 1964-1969 Buick Special Trunk Weatherstrip Seal
  • 1967-1969 Chevy Camaro Trunk Weatherstrip Seal
  • 1964-1972 Chevy Chevelle Trunk Weatherstrip Seal
  • 1962-1974 Chevy Chevy II Trunk Weatherstrip Seal
  • 1964-1972 Chevy Malibu Trunk Weatherstrip Seal
  • 1970-1972 Chevy Monte Carlo Trunk Weatherstrip Seal
  • 1962-1974 Chevy Nova Trunk Weatherstrip Seal
  • 1964-1972 Olds 442 Trunk Weatherstrip Seal
  • 1964-1972 Olds Cutlass Trunk Weatherstrip Seal
  • 1964-1972 Olds Cutlass Supreme RWD Trunk Weatherstrip Seal
  • 1964-1972 Olds F85 Trunk Weatherstrip Seal
  • 1967-1969 Pontiac Firebird Trunk Weatherstrip Seal
  • 1964-1972 Pontiac GTO Trunk Weatherstrip Seal
  • 1969-1972 Pontiac Grand Prix Trunk Weatherstrip Seal
  • 1964-1972 Pontiac LeMans Trunk Weatherstrip Seal
  • 1964-1972 Pontiac Tempest Trunk Weatherstrip Seal
  • 1973-1974 Pontiac Ventura Trunk Weatherstrip Seal

This part replaces:

  • Metro Moulded Parts TK 46-16
Part #: 1AWST00037

How-to Video:

(12:06 min)