Replaces

Transfer Case Shift Motor Dorman 600-924 - 1AFWM00036

Specifications:

  • Brand New Transfer Case Motor
  • Direct replacement
    • Not Remanufactured
  • Built to strict quality control standards

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Transfer Case Shift Motor (0:50)
    • Raise and support the vehicle
    • Remove the three 10mm bolts from the transfer case shift motor heat shield
    • Remove the heat shield
    • Disconnect the transfer case shift motor wiring harness
    • Remove the four 10mm bolts from the motor
    • Pry the motor off the transfer case with a flat blade screwdriver
    • Remove the locking clip from the wiring harness with needle nose pliers
    • Push the ground wire out of the wiring harness with a flat blade screwdriver
  2. step : Installing the Transfer Case Shift Motor (3:23)
    • Remove the bracket from the old motor
    • Put the negative wire connector between the bracket and the motor
    • Snap the bracket onto the new motor
    • Turn the transfer case shaft with pliers to match the motor
    • Put the motor into place
    • Start the top two 10mm bolts that hold the motor to the transfer case
    • Connect the ground wire to the wiring harness
    • Push the locking clip into the wiring harness
    • Start the remaining two 10mm bolts
    • Tighten the four 10mm bolts
    • Connect the transfer case shift motor wiring harness
    • Put the heat shield into place
    • Insert the three 10mm bolts into the heat shield

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2004Ford Explorer Ford Explorer Transfer Case Shift Motor (Built After 1/04/04 Production Date) Dorman 600-924
2005Ford Explorer Ford Explorer Transfer Case Shift Motor Dorman 600-924
2006-2007Ford Explorer Ford Explorer Transfer Case Shift Motor Dorman 600-924
2006-2007Mercury Mountaineer Mercury Mountaineer Transfer Case Shift Motor Dorman 600-924

This part replaces:

  • Dorman 600-927
  • Hollander 420-00120
  • Dorman 600-924
  • OE # 4L2Z7G360AA
  • OE # 4L2Z7G360BB
Only 2 left in stock
Part #: 1AFWM00036


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Dorman
Brand #: 600-924

How-to Video:

(07:34 min)