Replaces

Transfer Case Shift Motor Dorman 600-910 - 1AFWM00029

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Brand new replacement
  • Replaces dealer part number: 88962314
  • 7 pin rectangle connector
  • Fits New Venture Gear NVG246, 236,246 transfer cases with RPO Code NP8 - Auto Trac
  • Built to strict quality control standards
  • No core charge!
  • Will not fit transfer cases with RPO Code NR4

If you have any questions about this part fitting your vehicle, please call your local dealer with part number: 88962314. They will tell you if it is the correct part for your truck.

Note: If your vehicle requires a match to an RPO (Regular Production Option) code, you can usually find it on your original window sticker and sometimes either on the inside of your trunk lid, spare tire cover, glove box door, or the front driver's side door shell.

If you are having problems with your 4wd not engaging because of a defective 4x4 shift motor, then this part is for you!! Why search through junk yards hoping to find a used 4x4 electric transfer case shift motor when you can have brand new! Replace that defective transfer case 4x4 shift motor now with a brand new part.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Front Drive Shaft (0:22)
    • Mark the position of the shaft on the u-joint and driveshaft with a marker
    • Brace the drive shaft with a pry bar
    • Loosen the four 11mm nuts from the shaft
    • Pry the drive shaft from the U-joint
    • Push the drive shaft backwards and out of the u-joint
    • Work a pry bar carefully under the boot
    • Slide the drive shaft out of the transfer case
  2. step : Removing the Transfer Case Shift Motor (3:49)
    • Remove the 15mm bolts from the skid plate
    • Remove the skid plate
    • Disconnect the connector
    • Remove the three 15mm bolts from the case motor
    • Remove the case shift motor
    • Clean off the area
    • Put the transfer case in neutral
  3. step : Installing the Transfer Case Motor (7:17)
    • Clean off the gasket with glass cleaner
    • Lower the gasket to the transfer case motor
    • Press the gasket to the motor
    • Insert the motor into place
    • Tighten the 15mm bolts to the motor
    • Torque the bolts to 15 foot-pounds
    • Connect the connector
    • Tighten the 15mm bolts to the skid plate
  4. step : Installing the Front Drive Shaft (10:33)
    • Line up the shaft over the crossmember and into the transfer case
    • Line up the markings with the shaft on the u-joint
    • Insert the drive shaft into the u-joint
    • Tighten the four 11mm bolts to the drive shaft
    • Tighten the bolts to 19 foot-pounds

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Marker / Writing Utensil

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 11mm Socket

  • Wrenches - Metric

  • 11mm Wrench

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Transfer case motor
So far I am completely satisfied with your products. Also the videos you produce are extremely helpful and very easy to navigate through them. Keep up the great work. Faithful customer, Jim Fischer.
January 31, 2017
perfect fit and 4 wheel drive works flawlessly now
Part came on time. Fit was exact. And the truck 4 wheel drive now works perfectly.
July 22, 2017
Great Customer Service
I ordereded this part for my Suburban and when it arrived, I followed the video they have on the install. The video was spot on and very helpful. However, the part was defective out of the box and after some troubleshooting, I called customer service. They listened to my explanation of the situation, and immediately shipped me another part. When that one arrived, it went right on and worked like a champ. Thank you for the awesome customer service.
December 31, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is there a way to shift into correct position after connecting and switching into incorrect position?
David D March 16, 2017
I had to shift my yukon into neutral and then press 4 Hi, and then back to 2 wheel in order to get proper function and indication after installing the new transfer case motor.
Jason B March 16, 2017
David, I went through hell and back trying to get mine to work. If the motor and the transmission are not aligned you will not get it to work not matter how many times you clear the error code. I suspect there is a better way but I took the cover off and re aligned the motor to match the transmission and by the grace of god and after two months of racking my brain it worked!! Hope this helps.
Drew P March 16, 2017
we had a 2005 Yukon. We left the car in 2 wheel drive. Went to put the new motor on did not fit. We determined the new one was shipped in the neutral position. We put the old one back on. Shifted it into neutral took the old one back off and then put the new one on and it fit.
Jeffrey R March 16, 2017
Does the encoder in this part need to be programmed?
Tyler T March 25, 2017
No, the encoder ring does not need to be programmed.
Tim K March 26, 2017
I did not need to do any programming. Simply installed the part and powered up truck and cycled the push button switch to allow the motor to synchronize on its own. hope this helps.
John F July 22, 2017
My truck did not. 04 Z71 Suburban with 180K miles.
Douglas F January 16, 2018
Does this come with a new gasket?
James M January 14, 2018
Thanks for your question! I am not seeing that a gasket is included with the shift motor. The old gasket is typically reused. You can watch our install video for details. Thanks!!
Adam G January 16, 2018
yes
Winston S January 16, 2018
Yes. Its a hard plastic gasket like the original.
FatBob21 F January 16, 2018
James, I recently (Nov 17) bought this exact part. It did not come with a gasket. Videos I viewed said to re-use the old one, and I did. My 2004 Suburban had 180,000 on it. The part has worked flawlessly.
Douglas F January 16, 2018
No it dontEnter
Wayne M January 16, 2018
Year Make Model Description
2007Cadillac Escalade Cadillac Escalade Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2007Cadillac Escalade ESV Cadillac Escalade ESV Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2007Cadillac Escalade EXT Cadillac Escalade EXT Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2007Chevy Avalanche Chevy Avalanche Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2006Chevy Avalanche 2500 Chevy Avalanche 2500 Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2006Chevy Silverado 1500 Chevy Silverado 1500 Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2007Chevy Silverado 1500 Classic Chevy Silverado 1500 Classic Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003Chevy Silverado 1500 HD Chevy Silverado 1500 HD Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2005-2006Chevy Silverado 1500 HD Chevy Silverado 1500 HD Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2007Chevy Silverado 1500 HD Classic Chevy Silverado 1500 HD Classic Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2004Chevy Silverado 2500 Chevy Silverado 2500 Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2006Chevy Silverado 2500 HD Chevy Silverado 2500 HD Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2007Chevy Silverado 2500 HD Classic Chevy Silverado 2500 HD Classic Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2007Chevy Suburban 1500 Chevy Suburban 1500 Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2007Chevy Suburban 2500 Chevy Suburban 2500 Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2007Chevy Tahoe Chevy Tahoe Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2006GMC Sierra 1500 GMC Sierra 1500 Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2007GMC Sierra 1500 Classic GMC Sierra 1500 Classic Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003GMC Sierra 1500 HD GMC Sierra 1500 HD Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2005-2006GMC Sierra 1500 HD GMC Sierra 1500 HD Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2007GMC Sierra 1500 HD Classic GMC Sierra 1500 HD Classic Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2004GMC Sierra 2500 GMC Sierra 2500 Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2006GMC Sierra 2500 HD GMC Sierra 2500 HD Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2007GMC Sierra 2500 HD Classic GMC Sierra 2500 HD Classic Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2007GMC Yukon GMC Yukon Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2007GMC Yukon XL 1500 GMC Yukon XL 1500 Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
2003-2007GMC Yukon XL 2500 GMC Yukon XL 2500 Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) Dorman 600-910
Only 2 left in stock
Part #: 1AFWM00029


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Dorman
Brand #: 600-910

How-to Video:

(13:47 min)