Transfer Case Shift Motor Dorman 600-803 - 1AFWM00009

This new electric transfer case shift motor is a high quality, value priced, aftermarket replacement part.

If you are having problems with your 4wd not engaging because of a defective 4x4 shift motor, then this part is for you!! Why search through junk yards hoping to find a used 4x4 electric transfer case shift motor when you can have brand new! Replace that defective transfer case 4x4 shift motor now.


  • Mounts on to transfer case
  • Replaces dealer part number: YL2Z7G360AA, YL2Z7G360A, YL2Z 7G360 A, YL2Z 7G360 AA
  • Direct bolt on
  • Built to strict quality control standards
  • Fits Borg Warner 4405 Transfer Case with Rectangular Plug with 7 Pins

Note: If you have any questions about this fitting your application, please call your local Ford or Mercury dealer with the above part number.

This 4x4 Ford/Mercury electric transfer case shift motor has substantial cost savings over a dealer supplied shift motor.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the transfer shift case motor (1:00)
    • Unplug the harness connection
    • Use a flat blade screwdriver to pry and gut the connector off
  2. step : Remove the motor (2:25)
    • Remove the 10mm mounting bolts
  3. step : Install the new mounting bolts (3:20)
    • Mount the new motor
    • Remove the plastic piece locking the wire pins in place in the connector
    • Transfer the contact pins into the new connector
    • Make sure the contact pins go in the same place they were in the old contact.
    • Secure the harness above the motor
    • Bolt in the new motor

Tools needed for replacement:

    Diagnostic Tools

  • Test Light

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1997 Ford Explorer Transfer Case Shift Motor
It's true. Change the shift motor and all those problems of going in and out of low range, go away.
this is a fairly easy job, just make sure that you change 1 wire at a time when doing the plug, and you wont have any troubles.
I did remove the balancer weight on the trans to give me more room to work, plus I hung the motor on one of the studs when I was changing the wires. this shifting motor works great and recommend it. Thank you 1A Auto
January 15, 2018
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
My car has a drywheel problem,need to know that to do?
Miguel S on Dec 23, 2015
BEST ANSWER: Hello, Sorry but we do not have online tech advice or services. We recommend having a local repair shop diagnose the issue and order parts accordingly.

Vehicle Fit

Year Make Model Description
1995-2001Ford Explorer Ford Explorer Transfer Case Shift Motor for Models with 7 Pin Connector Rectangle Plug Dorman 600-803
2000-2001Mercury Mountaineer Mercury Mountaineer Transfer Case Shift Motor for Models with 7 Pin Connector Rectangle Plug Dorman 600-803

This part replaces:

  • Dorman 600-803
  • Hollander 420-00162
Part #: 1AFWM00009

Out of Stock

Brand #: 600-803

How-to Video:

(09:15 min)