Replaces

Transfer Case Shift Motor A1 Cardone 48-113 - 1AFWM00024

This remanufactured electric Four Wheel Drive transfer case shift motor is a high quality, rebuilt part.

Specifications:

  • High quality replacement
  • Replaces dealer part number: 88962314
  • 7 pin rectangle connector
  • Fits New Venture Gear NVG246, 236,246 transfer cases with RPO Code NP8 - Autotrac
  • Built to strict quality control standards
  • Motor is 100% computer tested at 3 points in the manufacturing process. - Guaranteed performance every time
  • Motor is assembled with the precise amount of lubricant. - Ensures quiet operation and long life
  • No core charge!
  • Will not fit transfer cases with RPO Code NR4

If you have any questions about this part fitting your vehicle, please call your local dealer with part number: 88962314. They will tell you if it is the correct part for your truck.

Note: If your vehicle requires a match to an RPO (Regular Production Option) code, you can usually find it on your original window sticker and sometimes either on the inside of your trunk lid, spare tire cover, glove box door, or the front driver's side door shell.

If you are having problems with your 4wd not engaging because of a defective 4x4 shift motor, then this part is for you!! Why search through junk yards hoping to find a used 4x4 electric transfer case shift motor when you can have brand new! Replace that defective transfer case 4x4 shift motor now with a brand new part.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Front Drive Shaft (0:22)
    • Mark the position of the shaft on the u-joint and driveshaft with a marker
    • Brace the drive shaft with a pry bar
    • Loosen the four 11mm nuts from the shaft
    • Pry the drive shaft from the U-joint
    • Push the drive shaft backwards and out of the u-joint
    • Work a pry bar carefully under the boot
    • Slide the drive shaft out of the transfer case
  2. step : Removing the Transfer Case Shift Motor (3:49)
    • Remove the 15mm bolts from the skid plate
    • Remove the skid plate
    • Disconnect the connector
    • Remove the three 15mm bolts from the case motor
    • Remove the case shift motor
    • Clean off the area
    • Put the transfer case in neutral
  3. step : Installing the Transfer Case Motor (7:17)
    • Clean off the gasket with glass cleaner
    • Lower the gasket to the transfer case motor
    • Press the gasket to the motor
    • Insert the motor into place
    • Tighten the 15mm bolts to the motor
    • Torque the bolts to 15 foot-pounds
    • Connect the connector
    • Tighten the 15mm bolts to the skid plate
  4. step : Installing the Front Drive Shaft (10:33)
    • Line up the shaft over the crossmember and into the transfer case
    • Line up the markings with the shaft on the u-joint
    • Insert the drive shaft into the u-joint
    • Tighten the four 11mm bolts to the drive shaft
    • Tighten the bolts to 19 foot-pounds

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Marker / Writing Utensil

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 11mm Socket

  • Wrenches - Metric

  • 11mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007 Cadillac Escalade (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2007 Cadillac Escalade ESV (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2007 Cadillac Escalade EXT (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2007 Chevy Avalanche 1500 (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2006 Chevy Avalanche 2500 (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2006 Chevy Silverado 1500 (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2007 Chevy Silverado 1500 Classic (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003 Chevy Silverado 1500 HD (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2005-2006 Chevy Silverado 1500 HD (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2007 Chevy Silverado 1500 HD Classic (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2004 Chevy Silverado 2500 (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2006 Chevy Silverado 2500 HD (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2007 Chevy Silverado 2500 HD Classic (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2007 Chevy Suburban 1500 (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2007 Chevy Suburban 2500 (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2007 Chevy Tahoe (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2006 GMC Sierra 1500 (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2007 GMC Sierra 1500 Classic (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003 GMC Sierra 1500 HD (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2005-2006 GMC Sierra 1500 HD (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2007 GMC Sierra 1500 HD Classic (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2004 GMC Sierra 2500 (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2006 GMC Sierra 2500 HD (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2007 GMC Sierra 2500 HD Classic (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2007 GMC Yukon (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2007 GMC Yukon XL 1500 (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113
  • 2003-2007 GMC Yukon XL 2500 (Remanufactured) Transfer Case Shift Motor for Models with RPO Code NP8 (Push Button, 2 Speed Transfer Case) A1 Cardone 48-113

This part replaces:

  • A1 Cardone 48-113
  • Hollander 420-00138
  • OE # 88962314
Only 2 left in stock
Part #: 1AFWM00024

Ships Same Day for orders placed by 4 P.M. ET

A1 CARDONE
Brand #: 48-113

How-to Video:

(13:47 min)