Part Details

  • Quantity: Pair
  • Front or Rear Location: Rear
  • Location: Lower

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) REAR LOWER
  • Include new bushings
  • Direct replacements
  • Made to strict quality control standards

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:31)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Lower Control Arm (1:53)
    • Loosen the 10mm bolts from the brake line bracket
    • Support the rear axle with a floor jack so the angle of the bar is close to ride height
    • Secure a 17mm wrench to the nut on the control arm
    • Loosen the nuts on the ends of the control arm with an 19mm socket and breaker bar
    • Pry the control arm out
    • If the control won't remove, jack up underneath the rear differential with a jack
    • Hammer out the bolt from the other end
  3. step : Installing the Lower Control Arm (10:48)
    • Insert the control arm into place
    • Insert the bolts to the ends of the control arm
    • Lower the jack from the transmission
    • Tap the bolt into the control arm
    • Raise the rear suspension to simulate ride height
    • Torque the bolt to 95 foot-pounds
    • Torque the bolt near the rear axle to 103 foot-pounds
    • If bolts remained in the brake line brackets, drill them out with a drill
    • Tighten the brake line brackets to the control arm with a 10mm socket and ratchet
  4. step : Reattaching the Wheel (22:15)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 105 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill

  • General Tools

  • Hammer
  • Center Punch

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

4.6 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
2
0
0
0
Amazing
I am so pleased with the parts I ordered from them! The parts were intact and well worth the price! I would have paid over double at any parts store out there such great help when financially low. The shipping was very fast an everything was in order. I also received lifetime warranty for my parts as well. My car is doing better and I am so happy I found this place online to buy my parts. I will order again when I need to. If you order from this place you will not be dissastisfied! I recommend anyone who wants good parts and to save some money to order from here. Thank You 1aAuto!
October 7, 2018
Purchased
3 weeks ago
Excellent Servicd
Ordering for your vehicle was convenient and quick given the ability to browse through parts specified to your vehicle. This is itself makes it absolutely easy. Shopping charges were the lowest ive encountered. Delivery time is by far the quickest. I am a satisfied with my overall experience at 1A Auto. Oh yes, let's not forget to mention the auto repair videos that are available on You Tube as well. Thanks 1A Auto.
August 15, 2018
Purchased
2 months ago
Parts
Parts fit perfectly except for one bracket short of being able to bow everything down but it was no big deal got everything fixed seem to be doing great thanks a lot I will definitely order again
February 5, 2018
Purchased
8 months ago
High Quality Part!
Superb Quality Part, prompt delivery and helpful installation vids make this purchase totally awesome and will recommend my circle of friends and family to check it out. Thanks 1A
September 20, 2017
Purchased
1 year ago
Fit Perfect
Price was write and the fit was good. Cured the dreaded Pathfinder away. So far so good
March 13, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Does it fit a 2002 Nissan Pathfinder?
Hector F on Dec 19, 2016
BEST ANSWER: Yes, these rear lower trailing arms are meant to be direct fit replacements for your 2002 Nissan Pathfinder.

Vehicle Fit

Year Make Model Description
1997-2003Infiniti QX4 Infiniti QX4 Rear Lower Trailing Arm Pair
1997-2004Nissan Pathfinder Nissan Pathfinder Rear Lower Trailing Arm Pair

This part replaces:

  • Dorman 905-803
  • Dorman 905-804
  • OE # 551113W700
  • OE # 551114W020
  • OE # 551102W110
  • OE # 551104W110
  • OE # 551102W400
  • OE # SEE NOTE FIELD
  • OE # 551113W710
  • OE # 551103W400
Part #: 1ASFK00214


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(23:43 min)