This replacement rear axle beam bushing PAIR is just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits into both the LH (Driver Side) & RH (Passenger Side) Rear Axle Beam (See Location Diagram)
  • New, not remanufactured or refurbished
  • Replaces dealer part number: 1J0 501 541 C, 1J0501541C
  • The outer casings of the bushings are plastic with rubber insulators, with metal cores
  • Will have to be pressed in by buyer
  • Commonly called "Beam Mount Bushing" by Volkswagen
  • Fits FWD (Front Wheel Drive) Models only
    • Does not fit 4WD (Four Wheel Drive) Models

NOTE: This is for two bushing to do both sides. If you only want to do one side, please see our singles listing.

Worn control arm bushings can cause excessive rear tire wear, popping or creaking in the rear end, extra play in the tracking system, and pose a serious safety concern. Replace that heavily rusted, rotted, or damaged rear axle beam bushings with our high quality all in one replacements.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

3.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
1
0
Plastic sleeve
I have never used a bushing like this before. I have alway had a steel collar around the bushing. I was a little sceptical, but they worked perfectly. They looked way too big, but as they were pressed they went right in. Shipping was really fast too. Good product.
February 26, 2018
Purchased
7 months ago
Too big
THe bushings i purchased and received were too large. They would not fit and if i tried pressing them in they would be ruined. I actually had to grind the outside diameter down with a bench grinder to make them fit. I had no other choice because i had the old ones were out already and i needed to make these fit. Mabye i was sent the incorrect ones but i fabricated them for my application and made them work whether they were ment for my vehicle or not. All in all they are in and seem to be working but time will tell.
September 26, 2017
Purchased
11 months ago
Response from 1A Auto
Thank you for your review, Jeffery! These bushings are meant for a press fit, and are actually a little larger than OE, because it is expected that the slot where the bushings fit will be a worn out. It is not uncommon to shave off some material to allow them to fit, so you should be okay.
September 26, 2017
Tim K Staff
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2000-2006Audi TT Audi TT Rear Trailing Arm Bushing Pair Front Wheel Drive
1998-2010Volkswagen Beetle VW Beetle Rear Trailing Arm Bushing Pair
1999Volkswagen Golf VW Golf Rear Trailing Arm Bushing Pair (Built After 10/98 Production Date)
2000-2006Volkswagen Golf VW Golf Rear Trailing Arm Bushing Pair
1999Volkswagen Jetta VW Jetta Rear Trailing Arm Bushing Pair (Built After 10/98 Production Date)
2000-2004Volkswagen Jetta VW Jetta Rear Trailing Arm Bushing Pair
2005Volkswagen Jetta VW Jetta Rear Trailing Arm Bushing Pair (Built Before 1/05 Production Date)

This part replaces:

  • Dorman 905-900 x2
  • Moog K200371
  • Dorman 905-900
  • OE # 1J0 501 541 C
  • OE # 1J0 501 541 C x2
Part #: 1ASFK00153


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout