Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement Tail light is just what you need to get your Toyota Tundra in good looking form again!

Specifications:

  • LH (Driver Side)
  • Replaces dealer part number: 81560-0C010, 815600C010
  • Direct bolt on
  • Direct replacement
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So do not be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Toyota Tundra Tail light makes a great replacement and has good cost savings over a dealer unit.

 

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the tail light assembly (0:23)
    • Open the tail gate
    • Unbolt the two 10 mm bolts anchoring the tail light assembly.
    • Disconnect the wiring harness from under the vehicle and remove the bulbs.
    • Service your bulbs at this point or put your bulbs in the new tail light assembly.
  2. step : Install the tail light assembly (1:44)
    • Plug in the bulbs and wiring harness.
    • Clip the tail light assembly into the vehicle.
    • Replace the 10 mm bolts.
    • Close the tail gate.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Best Value & quick service
Lowest price found on the internet and I replaced the part myself saving $150 to $200 from local shop quotes.
March 2, 2017
As expected
Great dealing with, excellent u-tube helper, would use again for car parts
March 5, 2017
AS GOOD AS YOU GET
EASY TOO INSTALL CHEAPEST PRICE OUT THERE QUALITY PRODUCT CANT BEAT THEM WOULD USE THEM ANYTIME
October 16, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2002Toyota Tundra Toyota Tundra Tail Light Driver Side
2003Toyota Tundra Toyota Tundra Tail Light Driver Side (excluding Stepside Models)
2004Toyota Tundra Toyota Tundra Regular Cab Tail Light Driver Side (excluding Stepside Models)
2004Toyota Tundra Toyota Tundra Access Cab Tail Light Driver Side (excluding Stepside Models)
Part #: 1ALTL00193


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(02:42 min)