Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • LH (Driver Side)
  • Includes lens, housing, and mounting panel
  • Bulbs not included
  • Not correct for Double Cab models
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Change the bulbs (0:54)
    • To just change the bulbs, pop the hood.
    • Reach behind the headlight assembly and unplug the bulb and disconnect the wiring harness.
    • You will have to pull a rubber boot out of the way to get at the bulb and unclip a wire clip.
  2. step : Replace the head light assembly (3:27)
    • Use a Phillips screwdriver and a flat blade screwdriver to remove the push clip at the top corner of the headlight assembly.
    • Pull the parking light out and disconnect the parking light.
    • Remove the bulb and transfer it to the new parking light assembly.
    • Unbolt the 10 mm bolt and three 10 mm nuts anchoring the headlight assembly.
    • Unplug the wiring harness and remove the bulbs and transfer them to the new headlight assembly.
  3. step : Install the new headlight and parking light assemblies. (5:17)
    • Plug in the wiring harness to the headlight assembly.
    • Anchor it with the three nuts and the one 10 mm bolts.
    • Plug in the wiring harness to the parking light and mount it into the vehicle.
    • Secure it with the push clip by inserting the body of the clip into place and pushing the center down to lock it.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

2.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
0
1
0
Doesnt adjust properly
You should adjust by turning the adjustment wheel but I had to remove headlight and disassemble to adjust then reassemble to check alignment. Very aggravating and not as advertised
July 10, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2003Toyota Tundra Toyota Tundra Headlight Driver Side
2004Toyota Tundra Toyota Tundra Regular Cab Headlight Driver Side
2004Toyota Tundra Toyota Tundra Access Cab Headlight Driver Side
Part #: 1ALHL00662


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:59 min)