Replaces
Frequently bought together
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service a taillight on this 2008 Toyota Tacoma. Pretty easy. The only tool you'll need is a 10 millimeter wrench or a socket and ratchet. There were two different styles of lights. You'll see we take one style off and put the different style on.
Open up the tailgate, and then there's two 10 millimeter bolts right here. So, the first one's right here. Those two bolts are 10 millimeters, and I'm just going to speed it up here as I remove them. Once you have those bolts out, we'll pull back on the light, and it comes out.
If you're just looking to service the bulbs, these sockets twist counterclockwise, and it'll come out. Then the bulbs pull straight out from the sockets. If you want to disconnect the entire assembly, there is a connector right here. You press on the tab. Disconnect it.
At 1A Auto, we sell both the regular style light and this is the later style light. It has the chrome ring and clear lens, and so I'll show you it'll go in. It connects just like the original one. We'll put this back in and clip it. Then, obviously, it mounts right in. Just looking through the side here, there are two pins. Make sure that they line up. We'll use a little fast motion here as I start the bolts in by hand and then tighten them up nice and firm. You don't want to over-tighten them. Tighten them nice and firm with your 10 millimeter socket and ratchet or wrench. Okay, once it's installed, we'll do a little test.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
