Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set
  • Kit Includes:
      (2) Parking Lights
      (2) Headlights

Specifications:

  • Brand New Lighting Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Handling the Bulbs (0:32)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To replace just the headlight bulb (0:33)
    • Pop the hood and secure it.
    • Reach behind the headlight assembly in the engine bay and move the rubber boot and wire retainer to remove the bulbs.
    • Unclip them from the harness and replace.
  3. step : Remove the parking light assembly and front grille (2:10)
    • Remove the Phillips screw on top of the parking light assembly.
    • Unplug the bulb and harness.
    • Pull of the front grill using a long flathead screwdriver to unclip it.
  4. step : Remove the head light assembly (3:55)
    • Remove the two 10 mm nuts and one bolt with your socket and ratchet.
    • Pull out the headlight assembly.
    • Unplug the bulbs and harness.
  5. step : Install the new headlight assembly. (4:55)
    • Plug in the bulbs and harness.
    • Bolt the head light assembly using your 10 mm socket and ratchet.
    • Clip the grill back on.
    • Plug the parking light bulb and harness back in and bolt it back in using your Phillips screwdriver.
    • Close the hood and enjoy your new 1A Auto headlights.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Head light kit
They came on time and was easy to install. They fit perfect. High recommend this product
February 6, 2018
98 Tacoma Light Kits
I bought both the front & rear lights for my truck. Super simple to install with the help of You Tube. :) However, I was in an accident just a week later and totaled the front end of my truck. Soon it will have an entirely new front end. :(
March 19, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997Toyota Tacoma Toyota Tacoma (Built After 6/97 Production Date) 4 Wheel Drive 4 Piece Set Lighting Kit
1998-2000Toyota Tacoma Toyota Tacoma PreRunner Rear Wheel Drive 4 Piece Set Lighting Kit
1998-2000Toyota Tacoma Toyota Tacoma 4 Wheel Drive 4 Piece Set Lighting Kit
Part #: 1ALHT00124


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:21 min)