Toyota Sequoia Tundra Mirror - 1AMRE02542

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Mirror Signal Type:   Turn Signal
  • Mirror Operation:   Power
  • Mirror Color / Finish:   Chrome
  • Mirror Folding Type:   Power-Folding
  • Mirror Memory Type:   Memory
  • Mirror Heating Type:   Heated
  • Mirror Puddle Light Type:   Puddle Light

This replacement mirror is just what you need to get your vehicle in good looking form again!


  • Fits RH (Passenger Side)
  • Power Mirror
  • Power Folding
  • Puddle Light
  • Memory
  • Heated
  • Turn Signal
  • Chrome Cap
  • Replaces dealer part numbers: 87910-0C210, 87910-0C212, 87910-0C213, 879100C210, 879100C212, 879100C213
  • Direct replacement
  • Built to strict quality control standards
  • Without Auto Dimming

This mirror makes a great replacement and has good cost savings over a dealer unit.

Special Note:

  • Unless otherwise noted, replacement mirrors will only work properly on vehicles with the exact same options. If your vehicle does not have the options listed in specifications, the mirror(s) may not function properly.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Power Fold Feature Connections Explained (0:56)
    • Take a red wire from the module
    • Strip the end and insert it into a butt connector leading to the add a fuse circuit
    • Remove a factory 5 amp fuse (such as the cigarette lighter light)
    • Attach the black wire/ground to a rust-free clean bolt on bare metal underneath the dash
    • Connect the green connector to the switch
    • If you do not have factory power fold, peel the backing from the base plate on the mirror
    • Pull out the white and yellow connector that connects to the factory harness
    • Disconnect the white and yellow connector from blue and purple connectors
    • Run the white and yellow connector through the opening in the shield
    • Connect the white and yellow connector to the small powerfold feature harness

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Gloves

4.86/ 5.0
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Amazing Value and Speedy Delivery
You guys saved me over $800. The part was a perfect match and it works beautifully. I will definitely keep you in mind the next time I need an auto part. And I will most definitely recommend you to any and all of my friends and family. Thank again!
March 16, 2017
Quick delivery great product
Very helpful on the phone ordering ,quick delivery and very good quality product .Will be ordering in the future again when needed. Thanks again for the great service. They saved me close to $800.
August 14, 2017
Exactly like the Original
I seem to have a problem smashing door mirrors when I am backing up my trailer. This is my 3rd mirror from 1aauto. All have been a perfect fit and the same quality as the original. This one only took 10 minutes to install. Third time is a charm. FYI, my dealership wanted $750 bucks for the same mirror. Hope i dont need to order another one.
September 19, 2017
Perfect in every aspect. 1A Auto delivered as promised. Perfect fit, Thanks again 1A Auto, GC !!
January 9, 2018
Excellent replacement
Great replacement for very reasonable cost! I ordered here based on a recommendation from a friend... no I will be the one recommending buying here!
January 29, 2018
Toyota Sequoia side mirror
Process was easy. I read other reviews, then I brought up product info from 1A Auto, Submitted the order and in a few days it was at front door. Install was easy and product was exactly as stated. I am very pleased and will do business again with 1A Auto.
September 11, 2018
Passenger Mirror
Overall I am satisfied. Called and had gentlemen help with exactly what I needed as far as my passenger side mirror replacement. He went through all the things it needed (defrost, light under it etc). He did forget to add the blind spot indicator that the other mirror has but overall not that big a deal. Everything else works great.
October 4, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I notice the turn signal on the mirror is dotted instead of solid line so I am questioning if they are plug and play for my 08 Tundra limited?
Jeff B April 16, 2018
It worked on our 2010 Toyota Sequoia. The line is actually several small LED’s.
Michael J. L April 16, 2018
We advise that you order mirrors with the same exact mirror options as our original mirrors. Special Note: These mirrors will only work for vehicles with these exact options. If you do not have the options listed, these mirrors will not function properly. Our mirrors are intended to be a direct plug and play for the exact options listed.
Adam G April 16, 2018
I installed one of these mirrors in the passenger side of my wifes 2010 limited and it plugged right into the factory connector. Everything worked as intended.
Tyler M April 16, 2018
This product works very good, if not better than the original. it is plugged n play, feels like OEM
David D April 17, 2018
I bought the same one for my 08 limited. It is plug and play.
Caleb H April 17, 2018
Year Make Model Description
2008-2013Toyota Sequoia Toyota Sequoia Power Heated Turn Signal Memory Puddle Light Power-Folding Chrome Mirror Passenger Side
2007-2013Toyota Tundra Toyota Tundra Power Heated Turn Signal Memory Puddle Light Power-Folding Chrome Mirror Passenger Side
Part #: 1AMRE02542

Out of Stock

How-to Video:

(03:16 min)