Replaces

Toyota Sequoia Tundra Mirror Driver Side - 1AMRE01796

This replacement mirror is just what you need to get your truck in good working condition again!

Specifications:

  • LH (Driver Side)
  • Power
  • Manual Folding
  • All Black
  • Direct replacement
  • Built to strict quality control standards
  • Non Heated
  • For Tundra Models, correct for Double (crew) cab only

This mirror makes a great replacement and has good cost savings over a dealer mirror.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed, the mirror may not function properly.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:49)
    • Disconnect the negative battery cable and set it aside.
    • Pry off the triangular panel at the top of the door panel.
    • Pry up the switch panel.
    • Disconnect the harness on the switch panel.
    • Pry out the plug under the armrest.
    • Pry out the front of the courtesy light and disconnect the harness.
    • Pry out the trap door behind the door handle.
    • Remove the plug on the inside of the door panel.
    • Remove the three uncovered Phillips screws.
    • Pry out above the lock pop out the door handle bezel.
    • Push the center of the pins on the edge of the door panel and pull the pins free.
    • Using a door panel clip tool or putty knife pry out all of the clips around the edge of the door panel.
    • Life the door panel up and off.
    • Pry out left behind clips and put them back into the door panel.
  2. step : Removing the Side Mirror (4:13)
    • Disconnect the mirror harness.
    • Remove the three 10mm nuts that secure the mirror.
    • Pull the mirror out and off.
  3. step : Replacing the Side Mirror (5:07)
    • Put the harness through the door.
    • Line up the mirror and push it into place.
    • Replace the three 10mm nuts.
    • Reconnect the mirror harness.
  4. step : Replacing the Door Panel (6:05)
    • Put the door panel on the window sill and pull the harnesses through.
    • Push the pins in around the door panel.
    • Replace the triangular panel at the top of the door panel
    • Replace the door handle bezel.
    • Reconnect the switch panel and push it down into place.
    • Reconnect the courtesy light and push it into place.
    • Replace the three Phillips screws.
    • Replace the covers.
    • Replace the pins on the outside of the door panel.
    • Reconnect the negative battery cable.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Specialty Tools

  • Door Panel Removal Tool

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
Will the connection be the same? I am talking about the white part where you connect them I bought one and it was smaller then the one on this video it was a great fix mirrow but when I came to connections you couldn't put them together
Veronica P on Jun 21, 2017
BEST ANSWER: This mirror will only work for vehicles with these exact options. If you do not have the options listed, these mirrors may not function or fit properly.

As long as this mirror matches your OEM options exactly then the plug will match!
Can I get my money back if the mirror is a wrong fix ?
Veronica P on Jun 21, 2017
BEST ANSWER: You can send the part back as long as it is within 60 days of purchase, but you will be responsible for return shipping costs.

How-to Video:

(08:17 min)

Tools List:

    General Tools

  • Putty Knife

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Specialty Tools

  • Door Panel Removal Tool

  • Wrenches - Metric

  • 10mm Wrench



This part replaces:

  • Hollander 128-61385BL
  • Partslink TO1320193
  • OE # 879400C060C0

Vehicle Fit

  • 2001-2007 Toyota Sequoia Power Black Manual-Folding Mirror Driver Side
  • 2004-2006 Toyota Tundra Double Cab Power Black Manual-Folding Mirror Driver Side
Part #: 1AMRE01796

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More