Replaces

Toyota Sequoia Tundra Front or Rear Driver Side Interior Door Handle DIY Solutions

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Color:   Oak Brown

This door handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits LH (Driver Side) FRONT or REAR
  • Replaces dealer part number: 69206-0C030-E0, 692060C030E0
  • Smooth Oak Finish
  • Direct replacement
  • Built to strict quality control standards

This door handle is a great replacement and has good cost savings over the dealer unit.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Disconnecting the Battery (0:41)
    • Disconnect the negative battery cable with an 8mm wrench
  2. step : Removing the Door Panel (0:52)
    • Pry off the mirror base trim panel with a flat blade screwdriver
    • Pry off the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harness
    • Pry off the screw cover panel below the door pull with a flat blade screwdriver
    • Pry off the courtesy light with a flat blade screwdriver
    • Disconnect the courtesy light wiring harness
    • Pry off the door handle trim piece with a flat blade screwdriver
    • Pry off the screw cover panel at the top front corner of the door with a flat blade screwdriver
    • Remove the Phillips head screw at the top front corner of the door
    • Remove the Phillips head screw inside the door handle
    • Remove the Phillips head screw below the door pull
    • Pry off the door handle bezel with a flat blade screwdriver
    • Push in the clips at the back of the door panel
    • Pull the clips out of the back door panel
    • Pry the door panel off of its clips with a putty knife or door panel clip tool
    • Remove any clips that remain in the door with needle nose pliers
    • Push those clips into the door panel
  3. step : Removing the Door Handle (4:06)
    • Slide the door handle back and pull it off
    • Pull the cables out of the door handle
  4. step : Installing the New Door Handle (4:24)
    • Turn the new door handle upside down
    • Put the top cable into the lower clip (still holding the handle upside down)
    • Put the bottom cable into the lower clip (still holding the handle upside down)
    • Turn the handle right side up
    • Push the door handle into place
  5. step : Reinstalling the Door Panel (5:07)
    • Put the door panel into place, pulling the wiring harnesses through their cavities
    • Push the door panel clips in
    • Push on the mirror base trim panel
    • Push the door handle bezel in
    • Connect the window switch wiring harness
    • Push in the window switch panel
    • Connect the courtesy light wiring harness
    • Push in the courtesy light
    • Insert the Phillips screw below the door pull
    • Insert the Phillips screw into the door handle
    • Insert the Phillips screw at the top front corner of the door panel
    • Push in the screw cover below the door pull
    • Push in the screw cover into the door handle
    • Push in the screw cover at the top front corner of the door panel
    • Push the clips into the back of the door panel
  6. step : Reconnecting the Battery (6:55)
    • Reconnect the negative battery cable

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Specialty Tools

  • Door Panel Removal Tool

  • Wrenches - Metric

  • 8mm Wrench

5.00/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
First time ordering from 1A Auto but will not be last. Product went on fairly easily thanks to the how to video.
March 20, 2018
Part arrived as advertised and instructional video was helpful
I was very pleased with my purchase (replacement door handle). the video did an excellent job of letting me know exactly what tools were required and what to expect in the replacement process.
February 5, 2019
Perfect
This is the perfect fit for my toyota sequia 2003
July 15, 2019
Great web experience
Received the part online and just as described. Never did this work before but the video was so easy and helped me change the broken handle in 20 minutes. Fantastic customer experience. Definitely will purchase parts here again!
July 29, 2019
Worked perfrectly
Part was a perfect replacement for OEM handle.
August 26, 2019
Fits perfectly and video tutorial is amazing
I am so happy to find 1aauto.com. the video tutorials are worth there weight in gold. the step by step instructions saved me not only hundreds of dollars, but also loads of time. I didnt have to take my truck to the dealer and have them fix it for me. Thank you so much. I am recommending 1aauto.com to all my friends.
October 13, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
CAN I GET IT IN GREY?
CHRISTINE B October 14, 2016
Can this part fits 2001 2 and 3 perfectly? Thanks
Saima N June 22, 2019
This part is listed to fit the following: 2001-07 Toyota Sequoia Front or Rear Oak Brown Interior Door Handle Driver Side 2004-06 Toyota Tundra Double Cab Front or Rear Oak Brown Interior Door Handle Driver Side
Peter L June 22, 2019

Fits the following Makes:

Year Make Model Description
2001-2007Toyota Sequoia Toyota Sequoia Front or Rear Driver Side Interior Door Handle
2004-2006Toyota Tundra Toyota Tundra Double Cab Front or Rear Driver Side Interior Door Handle

Part Interchange

Brand Label Part Number
DIY Solutions BHS01756

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ADHI00523
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BHS01756