Toyota Sequoia Tundra Heater Blower Motor with Fan Cage - 1AHCX00177

This Toyota Sequoia & Tundra Double Cab FRONT heater blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following


  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 871030C020, 87103-0C020, 871030C022, 87103-0C022
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • Fits the FRONT blower motor

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Blower Motor (0:36)
    • Disconnect the blower motor wiring harness
    • Remove the three T25 screws
    • Remove the blower motor
  2. step : Installing the Blower Motor (1:13)
    • Insert the blower motor into place
    • Tighten the three T25 screws to the blower motor
    • Connect the blower motor wiring harness

Tools needed for replacement:

    Torx Drivers & Sockets

  • T25 Torx Driver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Awesome Videos!
I had a noise from my heater/air conditioning blower. I looked on You Tube and 1A Auto popped up with a video on how to replace it. I have seen their videos in the past and used them to fix problems on my Suburban. Due to the fact that they take time to put up the videos, I decided to buy from them. I received my part quickly, and it worked perfectly! I will continue to buy parts from them in the future. Ordering was easy and efficient. I highly recommend 1A Auto.
July 22, 2017
7 months ago
Just like new
The blower was installed in not time and works great.
October 19, 2017
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(02:08 min)

Tools List:

    Torx Drivers & Sockets

  • T25 Torx Driver

This part replaces:

  • OE # 871030C022
  • Partslink TO3126110
  • Hollander 615-58548
  • TYC 700063
  • DEPO 312-58004-100

Vehicle Fit

  • 2001-2007 Toyota Sequoia Front Heater Blower Motor with Fan Cage
  • 2004-2006 Toyota Tundra Double Cab Front Heater Blower Motor with Fan Cage
Part #: 1AHCX00177

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More