Toyota Sequoia Tundra Fog Light Kit DIY Solutions LHT01111

Ordering on line was easy, had no issues. Order on the weekend and the part was shipped on the same weekend. Once here I open the box and installed the lights took about 30 minutes to install.

Good replacement for my oem fog lights, real happy with these.

rec this in excellent condition - very easy procedure in replacing the factory plugs with the lights and found the harness built into the Sequoia so instead of using the kit to finish the installation . Went to the oem style headlight switch and relay for the fuse panel behind the dash . The end result is a factory look set of lights .

I was originally only searching for the OEM style push button switch. Toyota wanted north of $60.00 just for the button! I kept searching and found this solution. Since my vehicle already had fog lights, I replaced the hazy 16 year old lenses with the new ones and used the wiring to set up the offroad lights on my Westin Bull Nose! I had rearrange some of the wiring as the signal wire goes the wrong way; and the ground does not need to travel all of the way to the fog lights. The only wire that needs to penetrate the firewall is the signal wire. On your Toyota, There will be a factory plug behind your dash cover that will have Key On power and ground that you can piggy back on. There will be some cutting and pulling involved for a clean install, but if you are buying this, you probably have the skills to complete the task. My best advice is to lay everything out on a big table to determine what you need to do for your vehicle.

Very nice fit.....super clear lenses and great price!

Install was quick and easy, everything fit like it should and the wiring harness was spot on for lengths!

Kit came with everything, sort of. The provided switch does not fit into the only open position in the dash. It would fit in the rear window switch sot but then I have the same issue with that switch (-1 Star) A call to customer service gave no satisfactory answers for the issue at hand. Seeing my rig is an 01 I think they have had adequate time to have a solution or a warning before purchasing(- another star) .

I had a fog light switch on my steering column that I picked up from the junk yard. I used the switch that came with this to install KC fog lights on my bull bar with no issues. I did have to rewire, solder, and KC fog lights to the switch, but everything worked out well. No issues at all since installing them a few years ago.

easy to install, look and work perfectly!

Good ??

What else can I say but Great fog light kit. Exact fitment in the original mounting holes on truck. Yes I would recommend this kit.