Toyota Sequoia Tundra Fog / Driving Light - 1ALFL00247

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Lighting Housing Shape:   Round

This replacement fog driving light is just what you need to get your vehicle in good looking form again!


  • RH (Passenger Side)
  • Replaces dealer part number: 81210-0C020, 812100C020
  • Bumper Mounted
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulbs or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Servicing the Fog Light Bulb (0:40)
    • Remove the three 10mm bolts from the fog light shroud
    • Twist the fog light bulb socket out of the fog light
    • Pull the bulb out of the socket
    • Push the new bulb into the socket
    • If you are servicing the bulbs alone, twist the bulb socket into the fog light
    • If you are replacing the entire fog light assembly, continue to Step 2
  2. step : Removing the Fog Light (1:27)
    • Pry out the fog light tabs with a flat blade screwdriver
    • Undo the fog light clip with pliers
    • Pull the fog light out from the front of the bumper
  3. step : Installing the New Fog Light (2:45)
    • Set the adjuster to the same distance as on the old fog light by hand
    • Push the new fog light into place from the front of the bumper
    • Twist the bulb socket into the fog light
    • Adjust the fog light aim as necessary with a flat blade screwdriver
    • Push the fog light shroud into place
    • Insert the three 10mm bolts into the shroud

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2007Toyota Sequoia Toyota Sequoia Round Fog / Driving Light Passenger Side
2003-2006Toyota Tundra Toyota Tundra Round Fog / Driving Light Passenger Side
Part #: 1ALFL00247

Out of Stock

How-to Video:

(05:07 min)