Replaces

Toyota Sequoia Tundra Fog / Driving Light Passenger Side - 1ALFL00247

This replacement fog driving light is just what you need to get your vehicle in good looking form again!

Specifications:

  • RH (Passenger Side)
  • Replaces dealer part number: 81210-0C020, 812100C020
  • Bumper Mounted
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulbs or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Servicing the Fog Light Bulb (0:40)
    • Remove the three 10mm bolts from the fog light shroud
    • Twist the fog light bulb socket out of the fog light
    • Pull the bulb out of the socket
    • Push the new bulb into the socket
    • If you are servicing the bulbs alone, twist the bulb socket into the fog light
    • If you are replacing the entire fog light assembly, continue to Step 2
  2. step : Removing the Fog Light (1:27)
    • Pry out the fog light tabs with a flat blade screwdriver
    • Undo the fog light clip with pliers
    • Pull the fog light out from the front of the bumper
  3. step : Installing the New Fog Light (2:45)
    • Set the adjuster to the same distance as on the old fog light by hand
    • Push the new fog light into place from the front of the bumper
    • Twist the bulb socket into the fog light
    • Adjust the fog light aim as necessary with a flat blade screwdriver
    • Push the fog light shroud into place
    • Insert the three 10mm bolts into the shroud

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(05:07 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench



This part replaces:

  • OE # 812100C021
  • Partslink TO2593112
  • Hollander 116-59476
  • DEPO 312-2017R-AF

Vehicle Fit

  • 2001-2007 Toyota Sequoia Round Fog / Driving Light Passenger Side
  • 2003-2006 Toyota Tundra Round Fog / Driving Light Passenger Side
Only 2 left in stock
Part #: 1ALFL00247

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More